DataSheet26.com

HCD-TB10 PDF даташит

Спецификация HCD-TB10 изготовлена ​​​​«Sony» и имеет функцию, называемую «COMPACT HiFi COMPONENT SYSTEM SERVICE MANUAL».

Детали детали

Номер произв HCD-TB10
Описание COMPACT HiFi COMPONENT SYSTEM SERVICE MANUAL
Производители Sony
логотип Sony логотип 

30 Pages
scroll

No Preview Available !

HCD-TB10 Даташит, Описание, Даташиты
http://www.xiaoyu163.com
QQ 376315150 H8C92D4-9T8B21990
SERVICE MANUAL
AEP Model
Ver 1.0 2002. 04
UK Model
E Model
This set is the tuner, deck, CD and amplifier
section in CHC-TB10.
CD
SECTION
Model Name Using Similar Mechanism
CD Mechanism Type
Optical Pick-up Block Type
NEW
CDM55C-K6A
KSM-213DCP
TAPE DECK Model Name Using Similar Mechanism
SECTION Tape Transport Mechanism Type
NEW
CMAL1Z222A
TEL 13942296513
QQ 376315150SPECIFICATIONS 892498299
Amplifier section
Frequency response
2 Hz – 20 kHz (±0.5 dB) Other models:
531 – 1,602 kHz
CD DIGITAL OUT
(with the interval set at
European models
DIN power output (Rated):40 + 40 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference):
50 + 50 watts
(6 ohms at 1 kHz, 10%
THD)
Music power output (Reference):
100 + 100 watts
(6 ohms at 1 kHz, 10%
THD)
Other models
Measured at AC 120/220/240 V, 50/60 Hz:
DIN power output (Rated):40 + 40 watts
(6 ohms at 1 kHz, DIN)
(Square optical connector jack, rear panel)
Wavelength
660 nm
Tape deck section
Recording system
Frequency response
Tuner section
4-track 2-channel stereo
50 – 13,000 Hz (±3 dB),
using Sony TYPE I
cassettes
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
Antenna
Antenna terminals
87.5 – 108.0 MHz
(50 kHz step)
FM lead antenna
75 ohms unbalanced
Antenna
Intermediate frequency
General
Power requirements
European models:
Mexican model:
Other models:
9 kHz)
530 – 1,710 kHz
(with the interval set at
10 kHz)
AM loop antenna
External antenna terminals
450 kHz
230 V AC, 50/60 Hz
120 V AC, 60 Hz
120 V, 220 V, 230 –
240 V AC, 50/60 Hz
Adjustable with voltage
selector
Continuous RMS power output (Reference):
Intermediate frequency
Inputs
50 + 50 watts
(6 ohms at 1 kHz, 10%
THD)
AM tuner section
Tuning range
European models:
MD IN (phono jacks): voltage 450 mV,
Outputs
impedance 47 kilohms
Pan-American models:
PHONES (stereo minijack):
accepts headphones of
8 ohms or more.
SPEAKER:
Accepts impedance of 6 to
16 ohms.
CD player section
10.7 MHz
531 – 1,602 kHz
(with the interval set at
9 kHz)
531 – 1,710 kHz
(with the interval set at
9 kHz)
530 – 1,710 kHz
(with the interval set at
10 kHz)
Power consumption
European models:
Other models:
100 watts
0.5 watts (at the Power
Saving Mode)
100 watts
Dimensions (w/h/d) incl. projecting parts and controls
Amplifier/Tuner/Tape/CD section:
Approx. 215 × 285 ×
334 mm
Mass
Amplifier/Tuner/Tape/CD section:
Approx. 6.5 kg
System
Compact disc and digital
audio system
Design and specifications are subject to change
without notice.
Laser
Semiconductor laser
(λ=780 nm)
Emission duration:
continuous
www x aoy u163 com. i9-873-944-01 Sony Corporation
COMPACT HiFi COMPONENT SYSTEM
.
2002D1600-1
Home Audio Company
© 2002.04
Published by Sony Engineering Corporation
http://www.xiaoyu163.com









No Preview Available !

HCD-TB10 Даташит, Описание, Даташиты
HCD-TB10
http://www.xiaoyu163.com
TABLE OF CONTENTS
QQ 376315150 8924982991. SERVICING NOTES ······················································· 3 6. DIAGRAMS ······································································ 19
2. GENERAL ·········································································· 5
3. DISASSEMBLY ································································ 7
3-1. Side Panel ····································································· 8
3-2. Top Panel ······································································ 8
3-3. Cassette Mechanism (CMAL1Z222A) ························ 9
3-4. Front Panel ··································································· 9
3-5. H/P Board, PANEL Board ········································· 10
3-6. LCD Board, BACK LIGHT Board ···························· 10
3-7. VOL Board ································································· 11
3-8. SUB TRANSFORMER Board, Back Panel ··············· 11
3-9. MAIN Board ······························································ 12
3-10. CDM Board, CD Mechanism Deck
(CDM55C-K6A) ························································ 12
3-11. Power Trans Former, P-AMP Board ·························· 13
3-12. Cam (CDM55) ··························································· 13
3-13. MOTOR (TRAY) Board ············································ 14
3-14. Holder Assy ································································ 14
3-15. MOTOR Board ··························································· 15
4. TEST MODE ···································································· 16
6-1. Circuit Boards Location ············································· 19
6-2. Block Diagrams ·························································· 21
6-3. Printed Wiring Board – MAIN Section – ·················· 23
6-4. Schematic Diagram – MAIN Section (1/4) – ············ 24
6-5. Schematic Diagram – MAIN Section (2/4) – ············ 25
6-6. Schematic Diagram – MAIN Section (3/4) – ············ 26
6-7. Schematic Diagram – MAIN Section (4/4) – ············ 27
6-8. Schematic Diagram – PANEL Section – ··················· 28
6-9. Printed Wiring Board – PANEL Section – ················ 29
6-10. Printed Wiring Board – LCD Section – ··················· 30
6-11. Schematic Diagram – AMP/POWER Section – ········ 31
6-12. Printed Wiring Board – AMP Section – ···················· 32
6-13. Printed Wiring Board – POWER Section – ·············· 33
6-14. Schematic Diagram – CD Section – ························· 34
6-15. Printed Wiring Board – CD Section – ······················· 35
6-16. Printed Wiring Board – MOTOR Section – ·············· 36
6-17. IC Pin Function Description ······································ 39
7. EXPLODED VIEWS ······················································ 41
7-1. Side Panel, Back Panel Section ·································· 41
7-2. Front Panel Section ···················································· 42
7-3. Chassis Section ·························································· 43
7-4. CD Mechanism Deck Section (CDM55C-K6A) ······· 44
5. ELECTRICAL ADJUSTMENTS ······························· 17
8. ELECTRICAL PARTS LIST ······································· 45
TEL 13942296513 QQ 376315150 892498299
www. xiaoyu163. com
2
http://www.xiaoyu163.com









No Preview Available !

HCD-TB10 Даташит, Описание, Даташиты
http://www.xiaoyu163.com
SECTION 1
HCD-TB10
SERVICING NOTES
NOTES ON HANDLING THE OPTICAL PICK-UP
QQ 376315150 892498299BLOCK OR BASE UNIT
The laser diode in the optical pick-up block may suffer electrostatic
break-down because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused on
the disc reflective surface by the objective lens in the optical pick-
up block. Therefore, when checking the laser diode emission,
observe from more than 30 cm away from the objective lens.
Laser component in this product is capable
of emitting radiation exceeding the limit for
Class 1.
This appliance is classified as a CLASS 1 LASER product. The
CLASS 1 LASER PRODUCT MARKING is located on the rear
TEL 13942296513 QQexterior.
This caution
label is
located inside
the unit.
376315150
892498299
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be
damaged by heat.
Flexible Circuit Board Repairing
• Keep the temperature of soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
www . xiaoy u163. comcircuitboard(within3times).
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
• Be careful not to apply force on the conductor when soldering
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
or unsoldering.
PUBLISHED BY SONY.
http://www.xiaoyu163.com
3










Скачать PDF:

[ HCD-TB10.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
HCD-TB10COMPACT HiFi COMPONENT SYSTEM SERVICE MANUALSony
Sony

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск