DataSheet26.com

HBD040ZED-A PDF даташит

Спецификация HBD040ZED-A изготовлена ​​​​«Power-One» и имеет функцию, называемую «HBD SERIES - DUAL OUTPUT/ 60 WATT».

Детали детали

Номер произв HBD040ZED-A
Описание HBD SERIES - DUAL OUTPUT/ 60 WATT
Производители Power-One
логотип Power-One логотип 

3 Pages
scroll

No Preview Available !

HBD040ZED-A Даташит, Описание, Даташиты
(888) IPD-CONVerters q (888) 473-2668 q www.ipdconverters.com
HBD SERIES - DUAL OUTPUT, 60 WATT
DESCRIPTION
FEATURES
HBD dual output, DC/DC converters feature high
efficiency, 1500 VDC isolation, and open-frame
packaging. The HBD family allows board designers
to deliver any combination of power from
either output, up to each model’s maximum rating.
The HBD is available in 5V/3.3V or 3.3V/2.5V
combinations in either a 24V or 48V input version. The
HBD uses planar magnetics and has an MTBF of over a
million hours.
• Independent Dual Outputs • Independent Trim
• Flexible Load Sharing
For Each Output
• High Efficiency Topology • 1500V Isolation
• Open-Frame Design
• 100°C Baseplate
• Planar Magnetics
Operation
Efficiency vs. Load (24V Input)
85
80
TECHNICAL SPECIFICATIONS
Voltage Range
24 VDC Nominal
48 VDC Nominal
Reflected Ripple
Input Reverse Voltage Protection
Input
18.00 - 36.00 VDC
34.00 - 75.00 VDC
80 mA
Shunt Diode
Output
Setpoint Accuracy
Line Regulation Vin Min. - Vin Max., Iout Rated, Output 1
Line Regulation Vin Min. - Vin Max., Iout Rated, Output 2
Load Regulation Iout Min. - Iout Max., Vin Nom., Output 1
Load Regulation Iout Min. - Iout Max., Vin Nom., Output2
Minimum Output Current
Dynamic Regulation, Loadstep
Pk Deviation
Settling Time
Voltage Trim Range (5V/3.3V Units)
Power Limit Threshold Range, % of Iout Rated
OVP Trip Range (Main Ouput)
General
Turn-On Time
Remote Shutdown
Switching Frequency
Isolation
Input - Output
Input - Case
Output - Case
Temperature Coefficient
Case Temperature
Operating Range
Storage Range
Thermal Shutdown Range
Humidity Max., Non-Condensing
Vibration, 3 Axes, 5 Min Each
MTBF† (Bellcore TR-NWT-000332)
Safety
Weight (approx.)
±1%
0.2% Vout
1.0% Vout
0.5% Vout
1.0% Vout
10% Iout Rated
25% Iout
4% Vout
500 µs
±10%
110 - 140%
115 - 140% Vout Nom.
10 ms
Positive Logic
500 kHz
1500 VDC
1050 VDC
500 VDC
0.03%/°C
-40 To +100°C
-40 To +125°C
105 To 115°C
95%
5g
1.3 x 106 Hrs
UL, CUL, VDE
2.4 oz
75
HBD060YGE-A
70 EFF. (18V)
EFF. (24V)
65 EFF. (36V)
60
10 20 30 40 50 60 70 80 90 100
LOAD %
Efficiency vs. Load (48V Input)
85
80
75
70
HBD060ZGE-A
65
HBD040ZGE-A
60 HBD040ZED-A
55
50
10 20 30 40 50 60 70 80 90 100
LOAD %
Notes
1 For negative logic, add suffix “N” to model number.
MTBF predictions may vary slightly from model to model.
Specifications typically at 25°C, normal line, and full load, unless otherwise
stated.
Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with
commercial wave-soldering equipment.
Safety: Agency approvals may vary from model to model. Please consult factory
for specific model information.
Units are water-washable and fully compatible with commercial spray or
immersion post wave-solder washing equipment.
1









No Preview Available !

HBD040ZED-A Даташит, Описание, Даташиты
HBD SERIES - DUAL OUTPUT, 60 WATT
MODELS - (See the last page of this file for options.)
Vin
(Volts)
Vin Range
(Volts)
Iin Max.*
(Amps)
Vout
(Volts)
Iout Rated
(Amps)
Ripple & Noise
Pk-Pk (mV)
24 18 - 36 2.89 3.3/2.5 12/15
24 18 - 36 4.54 5.0/3.3 12/15
24 18 - 36 3.02 5.0/3.3 8/12
48 34 - 75 1.51 5.0/3.3 8/12
48 34 - 75 1.62 3.3/2.5 12/15
48 34 - 75 2.27 5.0/3.3 12/15
Denotes advanced product release. Consult factory for product availability.
* Maximum input current at minimum input voltage, maximum rated output power.
** At nominal Vin, rated output.
Note: Current can be drawn from either output to its maximum value, or from both outputs to a combined total of 15A.
MECHANICAL DRAWING
75/75
100/75
100/75
100/75
75/75
100/75
Efficiency
Typ. **
75%
78%
80%
80%
75%
79%
Model
HBD040YED-A
HBD060YGE-A
HBD040YGE-A
HBD040ZGE-A
HBD040ZED-A
HBD060ZGE-A
MOUNTING INSERTS
M3X.5 THROUGH 4PL
1.700"(43.2mm)
1.400"(35.6mm)
1.000"(25.4mm)
1
2
0.400"(10.2mm)
3
04
-0.300"(-7.6mm)
-0.50"(-12.7mm)
-0.19"
(-4.8mm)
0
2.28"
(57.9mm)
5
6
BOTTOM VIEW
7
8
9
10
1.500"(38.1mm)
1.200"(30.5mm)
0.900"(22.9mm)
2.40"
(61.0mm)
0.500"(12.7mm)
DIA 0.040"
(1.0mm)
0.200"(5.1mm)
-0.100"(-2.5mm)
1.900"
(48.3mm)
.025" REF.
(0.6mm)
0.18"
(4.6mm)
0.50"
(12.7mm)
Thermal Impedance
Natural Convection
100 LFM
200 LFM
300 LFM
400 LFM
6.6 °C/W
5.7 °C/W
4.2 °C/W
3.1 °C/W
2.6 °C/W
Note:
Thermal impedance data is dependent on
many environmental factors. The exact
thermal performance should be validated for
specific application.
Pin Function
1 -Vin
2 Case
3 On/Off
4 +Vin
5 +Vout 2
6 - Vout 2
7 Trim 2
8 +Vout 1
9 -Vout 1
10 Trim 1
2
Tolerances
Inches:
.XX ± 0.020
.XXX ± 0.010
(Millimeters)
.X ± 0.5
.XX ± 0.25
Pin:
± 0.002
± 0.05
(Dimensions as listed unless otherwise
specified.)









No Preview Available !

HBD040ZED-A Даташит, Описание, Даташиты
OPTIONS
When ordering equipment options, use the following suffix information. Select the option(s) that
you prefer and add them to the model number. Example ordering options are located below the
options table.
OPTION
Negative Logic
Lucent Compatible Trim
Terminal Strip
Trim
Enable
Trim and Enable
Current Share
Headerless
SUFFIX
APPLICABLE SERIES
N HAS, HBD, HBS, HES, LES, QBS,
QES, TES, TQD
T HAS, HBD, HBS, HES, QBS, QES
TS XWS, XWD, XWT
1 IAS, LES
2 IAD, IAS, LES, SMS
3 IAS, LES
4 SMS
Y Encapsulated EWS, IWS, OWS
REMARKS
TTL “Low” Turns Module ON
TTL “High” Turns Module OFF
PIN LENGTH AND HEATSINK
OPTIONS
0.110” (2.8mm) Pin Length
0.150” (3.8mm) Pin Length
0.24” (6.1mm) Horizontal Heatsink
0.24” (6.1mm) Vertical Heatsink
0.45” (11.4mm) Horizontal
Heatsink
0.45” (11.4mm) Vertical Heatsink
0.95” (24.1mm) Horizontal
Heatsink
0.95” (24.1mm) Vertical Heatsink
Standard Pin Length is 0.180”
(4.6mm)
8 All Units (Except SMS)
9 All Units (Except SMS)
1H All Units (Except DIP, SIP, and SM Includes Thermal Pad
Packages)
1V All Units (Except DIP, SIP, and SM Includes Thermal Pad
Packages)
2H All Units (Except DIP, SIP, and SM Includes Thermal Pad
Packages)
2V All Units (Except DIP, SIP, and SM Includes Thermal Pad
Packages)
3H All Units (Except DIP, SIP, and SM Includes Thermal Pad
Packages)
3V All Units (Except DIP, SIP, and SM Includes Thermal Pad
Packages)
Example Options:HBS050ZG-ANT3V = HBS050ZG-A with negative logic, Lucent compatible trim, and
0.95” vertical heatsink.
LES015YJ-3N = LES015YJ with optional trim and enable, negative logic.
QBS066ZG-AT8 = QBS066ZG-A with Lucent compatible trim and 0.110” pin length.
NUCLEAR AND MEDICAL APPLICATIONS Power-One products are not authorized for use as critical components in life support systems,
equipment used in hazardous environments, or nuclear control systems without the express written consent of the President of Power-One, Inc.
TECHNICAL REVISIONS The appearance of products, including safety agency certifications pictured on labels, may change depending on the
date manufactured. Specifications are subject to change without notice.
3










Скачать PDF:

[ HBD040ZED-A.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
HBD040ZED-AHBD SERIES - DUAL OUTPUT/ 60 WATTPower-One
Power-One

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск