DataSheet26.com

HC3-5502B1-5 PDF даташит

Спецификация HC3-5502B1-5 изготовлена ​​​​«Intersil Corporation» и имеет функцию, называемую «SLIC Subscriber Line Interface Circuit».

Детали детали

Номер произв HC3-5502B1-5
Описание SLIC Subscriber Line Interface Circuit
Производители Intersil Corporation
логотип Intersil Corporation логотип 

12 Pages
scroll

No Preview Available !

HC3-5502B1-5 Даташит, Описание, Даташиты
TM POSSDOIaBBtLaSEOSShLUEHeBeTCStE-5TP5ITR0U2OBTDEUPCRTODUCT
HC-5502B1
April 1999 File Number 4127.2
SLIC Subscriber Line Interface Circuit
Features
[ /Title
(HC-
5502B
1)
/Sub-
ject
(SLIC
Sub-
scriber
Line
Inter-
face
Cir-
cuit)
/Autho
r ()
/Key-
words
(Inter-
sil
Semi-
con-
ductor,
RSLIC
18,
Tele-
com,
SLICs,
SLACs
, Tele-
phone,
Tele-
phony,
WLL,
Wire-
less
Local
Loop,
PBX,
Pri-
vate
Branch
Exchan
ge,
The Intersil SLIC incorporates many of the BORSHT
function on a single IC chip. This includes DC battery feed, a
ring relay driver, supervisory and hybrid functions. This
device is designed to maintain transmission performance in
the presence of externally induced longitudinal currents.
Using the unique Intersil dielectric isolation process, the
SLIC can operate directly with a wide range of station
battery voltages.
The SLIC also provides selective denial of power. If the PBX
system becomes overloaded during an emergency, the SLIC
will provide system protection by denying power to selected
subscriber loops.
The Intersil SLIC is ideally suited for the design of new digital
PBX systems, by eliminating bulky hybrid transformers.
Ordering Information
TEMP. RANGE
PART NUMBER
(oC)
PACKAGE
HC3-5502B1-5
HC4P5502B1-5
HC9P5502B1-5
0 to 75
0 to 75
0 to 75
24 Ld PDIP
28 Ld PLCC
24 Ld SOIC
PKG.
NO.
E24.6
N28.45
M24.3
Pinouts
HC-5502B1 (PDIP, SOIC)
TOP VIEW
TIP 1
RING 2
VB+ 3
C1 (NOTE) 4
C3 5
DG 6
RS 7
RD 8
TF 9
RF 10
VB- 11
BG 12
24 TX
23 AG
22 C4
21 RX
20 +IN
19 -IN
18 OUT
17 C2
16 RC
15 PD
14 GKD
13 SHD
NOTE: Optional.
• Low Cost Version of HC-5502B
• Capable of 12V or 5V (VB+) Operation
• Monolithic Integrated Device
• DI High Voltage Process
• Compatible With Worldwide PBX Performance
Requirements
• Controlled Supply of Battery Feed Current for Short Loops
(30mA)
• Internal Ring Relay Driver
• Low Power Consumption During Standby
• Switch Hook, Ground Key and Ring Trip Detection
Functions
• Selective Denial of Power to Subscriber Loops
Applications
• Solid State Line Interface Circuit for Analog and Digital PBX
Systems
• Direct Inward Dial (DID) Trunks
• Voice Messaging PBXs
• Related Literature
- AN549, The HC-5502S/4X Telephone Subscriber Line
Interface Circuits (SLIC)
- AN571, Using Ring Sync with HC-5502A and HC-5504
SLICs
HC-5502B1 (PLCC)
TOP VIEW
4 3 2 1 28 27 26
C1 (NOTE) 5
C3 6
DG 7
N/C 8
RS 9
RD 10
TF 11
25 RX
24 +IN
23 -IN
22 N/C
21 OUT
20 C2
19 RC
12 13 14 15 16 17 18
4-1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-724-7143| Copyright © Intersil Corporation 1999









No Preview Available !

HC3-5502B1-5 Даташит, Описание, Даташиты
HC-5502B1
Absolute Maximum Ratings (Note 1)
Supply Voltage
(VB-) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -60 to 0.5V
(VB+) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 to 15V
(VB+ - VB-) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75V
Relay Drive Voltage (VRD) . . . . . . . . . . . . . . . . . . . . . . . -0.5 to 15V
Operating Conditions
Relay Driver Voltage (VRD) . . . . . . . . . . . . . . . . . . . . . . . . 5V to 12V
Positive Supply Voltage (VB+) . . . 4.75V to 5.25V or 10.8V to 13.2V
Negative Supply Voltage (VB-). . . . . . . . . . . . . . . . . . . .-42V to -58V
High Level Logic Input Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . 2.4V
Low Level Logic Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . 0.6V
Loop Resistance (RL) . . . . . . . . . . . . . . . . . . . . . . . . . 200 to 1200
Operating Temperature Range
HC-5502B1-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0oC to 75oC
Thermal Information
Thermal Resistance (Typical, Note 2)
θJA (oC/W)
24 Lead PDIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
65
24 Lead SOIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
75
28 Lead PLCC . . . . . . . . . . . . . . . . . . . . . . . . . . . .
65
Maximum Junction Temperature Plastic . . . . . . . . . . . . . . . . . 150oC
Maximum Storage Temperature Range . . . . . . . . . .-65oC to 150oC
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . . 300oC
(SOIC and PLCC - Lead Tips Only)
Die Characteristics
Transistor Count . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Diode Count . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Die Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137 x 102 mils
Substrate Potential . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VB-
Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bipolar-DI
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTES:
1. Absolute maximum ratings are limiting values, applied individually, beyond which the serviceability of the circuit may be impaired. Functional
operability under any of these conditions is not necessarily implied.
2. θJA is measured with the component mounted on an evaluation PC board in free air.
Electrical Specifications
UTAnl=es2s5OoCth. eMrwini-sMeaSxpPeacirfiaemde, tVeBrs-
= -48V, VB+ = 12V and 5V, AG =
are Over Operating Temperature
BG = DG
Range
=
0V,
Typical
Parameters
PARAMETER
CONDITIONS
MIN TYP MAX
UNITS
On Hook Power Dissipation
Off Hook Power Dissipation
Off Hook IB+
Off Hook IB+x
Off Hook IB-
Off Hook Loop Current
Off Hook Loop Current
ILONG = 0 (Note 4), VB+ = 12V
- 135 235
RL = 600, ILONG = 0 (Note 4), VB+ = 12V
RL = 600, ILONG = 0 (Note 4), TA = -40oC
RL = 600, ILONG = 0 (Note 4), TA = 25oC
- 450 690
- - 6.0
- - 5.3
RL = 600, ILONG = 0 (Note 4)
- - 39
RL = 1200, ILONG = 0 (Note 4)
- 21 -
RL = 1200, VB- = -42V, ILONG = 0 (Note 4), TA =
25oC
17.5
-
-
mW
mW
mA
mA
mA
mA
mA
Off Hook Loop Current
Fault Currents
TIP to Ground
RL = 200, ILONG = 0 (Note 4)
25.5 30 34.5
- 14 -
mA
mA
RING to Ground
- 47 -
mA
TIP to RING
- 30 -
mA
TIP and RING to Ground
- 47 -
mA
Ring Relay Drive VOL
Ring Relay Driver Off Leakage
Ring Trip Detection Period
Switch Hook Detection Threshold
Ground Key Detection Threshold
Loop Current During Power Denial
Dial Pulse Distortion
IOL = 62mA
VRD = 12V, RC = 1 = HIGH, TA = 25oC
RL = 600, TA = 25oC
SHD = VOL
SHD = VOH
GKD = VOL
GKD = VOH
RL = 200
- 0.2 0.5
V
- - 100
µA
- 2 3 Ring Cycles
10 -
-
mA
- -5
mA
20 -
-
mA
- - 10
mA
- ±2 -
mA
0-5
ms
4-2









No Preview Available !

HC3-5502B1-5 Даташит, Описание, Даташиты
HC-5502B1
Electrical Specifications
PARAMETER
UTAnl=es2s5OoCth. eMrwini-sMeaSxpPeacirfiaemde, tVeBrs-
= -48V, VB+ = 12V and 5V, AG =
are Over Operating Temperature
BG = DG = 0V, Typical
Range (Continued)
Parameters
CONDITIONS
MIN TYP MAX
UNITS
Receive Input Impedance
(Note 3)
- 110 -
k
Transmit Output Impedance
(Note 3)
- 10 20
Two Wire Return Loss
SRL LO
Referenced to 600+2.16µF
(Note 3)
- 15.5 -
dB
ERL
- 24 -
dB
SRL HI
- 31 -
dB
Longitudinal Balance
2-Wire Off Hook
2-Wire On Hook
1VRMS 200Hz - 3400Hz, (Note 3)
IEEE Method
0oC TA 75oC
53 58
53 58
-
-
dB
dB
4-Wire Off Hook
50 58
-
dB
Low Frequency Longitudinal Balance
Insertion Loss
2-Wire to 4-Wire, 4-Wire to 2-Wire
R.E.A. Method, (Note 3)
R0oLC=6T0A0Ω≤,75oC
At 1kHz, 0dBm Input Level, Referenced 600
- - 23
- - -67
- ±0.05 ±0.2
dBrnC
dBm0p
dB
Frequency Response
200 - 3400Hz Referenced to Absolute
Loss at 1kHz and 0dBm Signal Level (Note 3)
- ±0.02 ±0.05
dB
Idle Channel Noise
2-Wire to 4-Wire, 4-Wire to 2-Wire
(Note 3)
- 15
- -89 -85
dBrnC
dBm0p
Absolute Delay
2-Wire to 4-Wire, 4-Wire to 2-Wire
(Note 3)
- -2
µs
Trans Hybrid Loss
Balance Network Set Up for 600
Termination at 1kHz
30 40
-
dB
Overload Level
2-Wire to 4-Wire, 4-Wire to 2-Wire
Level Linearity
2-Wire to 4-Wire, 4-Wire to 2-Wire
VB+ = 5V
VB+ = 12V
At 1kHz, (Note 3) Referenced to 0dBm Level
+3 to -40dBm
1.5
1.75
-
--
- ±0.05
VPEAK
VPEAK
dB
-40 to -50dBm
- - ±0.1
dB
-50 to -55dBm
- - ±0.3
dB
Power Supply Rejection Ratio
VB+ to 2-Wire
VB+ to Transmit
VB- to 2-Wire
VB- to Transmit
VB+ to 2-Wire
VB+ to Transmit
VB- to 2-Wire
VB- to Transmit
Logic Input Current (RS, RC, PD)
(Note 3)
30 - 60Hz
RL = 600
200 - 16kHz
RL = 600
0V VIN 5V
15 -
-
15 -
-
15 -
-
15 -
-
30 -
-
30 -
-
30 -
-
30 -
-
- - ±100
dB
dB
dB
dB
dB
dB
dB
dB
µA
4-3










Скачать PDF:

[ HC3-5502B1-5.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
HC3-5502B1-5SLIC Subscriber Line Interface CircuitIntersil Corporation
Intersil Corporation

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск