DataSheet26.com

CAP202 PDF даташит

Спецификация CAP202 изготовлена ​​​​«TE» и имеет функцию, называемую «Aerospace Commercial Contactor».

Детали детали

Номер произв CAP202
Описание Aerospace Commercial Contactor
Производители TE
логотип TE логотип 

2 Pages
scroll

No Preview Available !

CAP202 Даташит, Описание, Даташиты
KILOVAC High Voltage DC Contactors
KILOVAC CAP202 Series Aerospace Commercial Contactor with 2 Form X
(DPST-NO), Contacts Rated up to 300 Amps, 12-600 Vdc
Product Facts
n Hermetically sealed
n Up to 4X SPDT auxiliary
switch outputs: 30 Vdc/2A
max switching or 6V/5mA
min. signal
n Integrated coil economizer
with coil suppression
n EMC compliant - no radiated
coil emission
n Bidirectional switching -
main contacts not polarity
sensitive
n Mount in any orientation -
not position sensitive
Description
Physical or Other Properties
2-pole single throw hermeti-
cally sealed DC contactor;
12-900 Vdc/350A per pole
Not position sensitive
Bi-directional switching
Applications
Weight: 0.79 Kg
Hermetically sealed
Safe for harsh/corrosive
environments
No contacts oxidation over
periods on non-use
High Voltage DC Converter
Systems (ref schematic
below)
Test Equipment
Power Distribution
Power Motion Control
DPST-NO
CAP202 Contactor
270Vdc
Supply
+
270Vdc
Supply
+
270Vdc
Return
270Vdc
Components
270Vdc
Components
540Vdc
Components
For factory-direct application assistance,
dial 800-253-4560, ext. 2055, or
805-220-2055.
Electrical
Compact epoxy-sealed
resin enclosure occupies
only about 4 in3 (65.5 cm3)
Contact arrangement:
DPST-No (2 form X)
Voltage rating: 12-900 Vdc
(main contacts); 30 Vdc
(auxiliary)
Mechanical life: 100,000
cycles
Number of SPDT Auxiliary
Contacts per Contactor Type:
CAP202AS — None
CAP202MS — Two
CAP202FS — Four
Performance Data
Physical Data
Contact Arrangement
Power Contacts — DPST-NO (2 Form X)
Auxiliary Switches — SPDT (form C)
Dimensions — See drawings on next
page
Weight — 0.79 Kg (1.74 lb.)
Electrical Data
Voltage Rating
Main Contacts — 12-900Vdc
Auxiliary Catacts — 30VdC
Current Rating
Main Contacts1 — 350A/pole
Auxiliary Catacts — 3A
Contact Resistance
Main Contacts — (2)
100 mmax @ 1 amp
0.3 mmax. @ 200A after 3 mins.
Auxiliary Catacts — 200 mmax
7–14
Catalog 5-1773450-5
Revised 3-13
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
Hot Switching Performance @
± 400 Vdc (3)
100A make/break — 10,000 cycles
250A make/break — 2,500 cycles
700A break only — 10 cycles
Hot Switching Performance @
± 270 Vdc (4)
100A make/break — 40,000 cycles
250A make/break — 7,500 cycles
2000A break only @ ±370Vdc (5) —
2 cycles
Maximum Make Current — 700A
Dielectric Withstand Voltage over
Life — Terminal to Terminal/Terminals
to Coil — 1mA max @ 2,200Vrms
Insulation Resistance over Life
— Terminal to Terminal/Terminals to
Coil — 50mmin @ 500Vdc
Mechanical Life — 100,000 cycles
Environmental Data
Shock, 11ms 1/2 sine (operating)
— 20G peak
Sine Vibration, 10G peak
55-2,000 Hz.
Random Vibration, 14 Grms
15 100 300 900 2000 Hz
.01 .01 .2 .2 .01 G2/Hz
Operating Temperature Range
-55°C to +85°C
Notes:
1 Using 4/0 conductor. Current rating
is affected by attached conductor
size and design. Keep terminals
below 150˚C max. continuous,
175˚C for 2 hours max. and 200˚C
for 1 minute max. For mounting
large conductors, request terminal
adapter PN 3-1618396-7.
2 Operational contact resistance is
measured by millivolt drop across
contacts a > 100A current. Initial
contact resistance may be higher
than 0.3m, but will drop below
within 30 mins. max.
3 Voltage applied to each contact set
separately.
4 Voltage applied across both con-
tact sets in series.
5 May not pass 2,200 Vrms dielectric
testing after second interrupt cycle.
For additional support numbers
please visit www.te.com









No Preview Available !

CAP202 Даташит, Описание, Даташиты
Outline Dimensions*
KILOVAC High Voltage DC Contactors
KILOVAC CAP202 Series 12-900Vdc Contactors
2.29 ± .02 DIA
(58.19 ± .51)
A1 "+" POSITIVE TERMINAL
.225 ± .01DIA
(5.72 ± .26)
1.05 ± .01
(26.67 ± .26)
M8 x 1.25 POWER TERMINALS
(HARDWARE SUPPLIED):
2 X M8 WASHER, STAINLESS
2 X M8 LOCKWASHER – SPLIT RING, STAINLESS
2 X M8 x 1.25 NUT, STAINLESS
TORQUE 80 TO 100 IN-LB (8.8 TO 11 NM)
A2 "–" NEGATIVE TERMINAL
MOUNTING HARDWARE (NOT SUPPLIED):
2 X M5 BOLT
2 X M5 LOCKWASHER
2 X M5 NARROW WASHER
TORQUE 15 TO 30 IN-LB (1.7 TO 3.3 NM)
2.20 ± .025
(55.81 ± .63)
1.65 ± .01
(42.0 ± .26)
2.688 ± .01
(68.28 ± .26)
AUXILIARY CONTACT LEADS
WHITE = AUXILIARY CONTACT
(WHEN ORDERED)
BLACK = – COIL
RED = + COIL
COIL LEADS
SEE COIL WIRE
LENGTH IN P/N
3.17 ± .01
(80.48 ± .26)
2.04 ± .02 DIA
(51.94 ± .51)
STAINLESS
.55 ± .025
(14.04 ± .63)
2.05 ± .02
(52 ± .51)
2.45 ± .02
(62.23 ± .51)
2.85 ± .025
(72.3 ± .63)
.5 ± .01
(12.6 ± .26)
Coil Data (-40 to +85˚C temp range unless otherwise noted)
Voltage/Nominal Max.
28-32VDC
Pickup Voltage Max.
16VDC
Inrush Current @ 28 Vdc nominal/@32V maximum
3.4/6.0A
Inrush Time (nominal/maximum)
75/150mS
Hold Current @28V nominal / @32V maximum
0.27/0.48A
Drop Out Voltage
3 to 8Vdc
Internal Coil Suppression (max.)
60Vdc
Main Contacts: Operate Time, nominal/maximum
13/20mS
Main Contacts: Operate Bounce, nominal/maximum
3/10mS
Main Contacts: Release Time, nominal/maximum
25mS
Main Contacts: Release Time, maximum including
Maximum arc time
7/12mS
Ordering Information
Typical Part Number
CAP202 M S B F D
Series:
CAP202 = 2 form X, DPST-N0-DM Contactor
Auxiliary Contact Outputs (SPDT form C):
A = None
M = Two
F = Four
Coil Voltage:
S = 28V (with built-in electronically switched dual
coil economizer)
Coil and Aux. Wire Length:
A = 15.3 inches
B = 6 inches
X = Customer Special
Coil and Aux. Connector:
N = None
F = D Plug on flying leads (may affect wire length)
Mounting & Power Terminals:
D = 2X M5 Bottom Mount with 4X, M6 x 1 Female thread
terminals
Specifications are subject to change without notice.
7
For factory-direct application assistance,
dial 800-253-4560, ext. 2055, or
805-220-2055.
Catalog 5-1773450-5
Revised 3-13
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters USA: +1 800 522 6752
unless otherwise specified. Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
7–15










Скачать PDF:

[ CAP202.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
CAP200High Voltage DC ContactorsTE
TE
CAP200AAANAHigh Voltage DC ContactorsTE
TE
CAP202Aerospace Commercial ContactorTE
TE
CAP202ASAerospace Commercial ContactorTE
TE

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск