|
|
PDF SDT9808RM Data sheet ( Hoja de datos )
| Número de pieza | SDT9808RM | |
| Descripción | 2.5Gbps Fiber Optic Receiver Module | |
| Fabricantes | SET | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SDT9808RM (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
|
No Preview Available !
Specification : TS-S99D014D
November, 2003
Technical Specification
for
2.5Gbps Fiber Optic Receiver Module
SDT9808-R_-__
155.52Mb/s
Short Haul
Intermediate Reach
Single 5.0 V
1.3 µm
Transmitter
(
622.08Mb/s
Long Haul
Long Reach
Single 3.3 V
1.55 µm
Receiver
2R / 3R )
(
other _2_4_8_8._3_2M__b_ps_
other __________
other __________
other __________
Transceiver
2R / 3R )
Sumitomo Electric reserves the right to make changes in this specification without prior notice.
Safety Precaution# Symbols This specification uses various picture symbols to prevent possible injury to operator or
other persons or damage to properties for appropriate use of the product. The symbols and definitions are as shown below. Be sure to be
familiar with these symbols before reading this specification.
Warning Wrong operation without following this instruction may lead to human death or serious injury.
Caution Wrong operation without following this instruction may lead to human injury or property damage.
(SDT9808-R_-__)
indicates prohibition of actions. Action details are explained thereafter.
indicates compulsory actions or instructions. Action details are explained thereafter.
-1/7-
1 page  
8. Recommended User Interface
Specification : TS-S99D014D
November, 2003
FB1
+5V
Vcca ( 22 )
100µF
0.1µF 100pF
SDT9808-R
FB1
+5V
Vccd ( 8 )
100µF
0.1µF 100pF
GND
C1, C2: 10µF (Panasonic EEFCD1B100R)
L1 : 100µH (TDK SLF7045T-101MR50), Series Resistance < 3Ω, Imax > 120mA
FB1 : Ferrite Bead (TDK ZBF253D-00), Series Resistance < 0.1Ω, Imax > 1A
Figure 5 Recommended Power Supply Filtering
RD ( 10 )
0.022µF
RDb ( 11 )
SDT9808-R *
RCLK ( 6 )
RCLKb ( 5 )
50Ω Transmission Line
0.022µF
Vcc-2.0V
100pF
Vcc-2.0V
50Ω Data
50Ω
PECL/ECL Buffer
50Ω Clock
50Ω
Figure 6 Recommended interface with PECL / ECL Device
* SDT9808 has internal pull-down resistors.
9. Fiber Pigtail Specification
Parameter
Min. Typ. Max.
Core Diameter
9.5
Cladding Diameter
125
Outer Diameter
0.9
Optical Cord Tensile Break Strength
9.8
Bend Radius
30
Note 1. Strength between receiver body and optical fiber should be less than 9.8N
Unit
µm
µm
mm
N
mm
Note
Caution
Do not give undue force or impact to the optical fiber pigtail. A broken optical fiber may injure skin or human body, or a strong
laser beam may cause eye injury. Operate the equipment carefully. Use assisting tools or prospective aids as required.
(SDT9808-R_-__)
-5/7-
5 Page | ||
| Páginas | Total 7 Páginas | |
| PDF Descargar | [ Datasheet SDT9808RM.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SDT9808RC | 2.5Gbps Fiber Optic Receiver Module | SET |
| SDT9808RD | 2.5Gbps Fiber Optic Receiver Module | SET |
| SDT9808RM | 2.5Gbps Fiber Optic Receiver Module | SET |
| SDT9808RU | 2.5Gbps Fiber Optic Receiver Module | SET |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |