|
|
PDF GP1S09 Data sheet ( Hoja de datos )
| Número de pieza | GP1S09 | |
| Descripción | Photointerrupter with Connector | |
| Fabricantes | Sharp Electrionic Components | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de GP1S09 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
GP1S09
Photointerrupter with
Connector
GP1S09
s Features
1. Snap-in mounting type
2. Can be mounted on 2 different thickness
boards ( 1.0mm, 1.6mm )
3. 3-pin connector terminal
4. Wide gap between light emitter and detec-
tor ( 5mm )
s Applications
1. Copiers
2. Printers
3. Facsimiles
s Outline Dimensions
5.9
+ 1.0
- 0.5
21.8
16.0
0.9 6.5
4.5 5.0 4.5
g
(Unit : mm )
Internal connection
diagram
3 1 Anode
2 GND
2 3 Collector
1
6.0
3.0
0.8 ± 0.1
Slit width
32 1
0.9 2 - 4.0
2 - 8.0
11.8 2 - 3.0
4.0
2 - 0.9 2 - 0.9
10.2
* Unspecified tolerances shall be as follows;
Dimensions(d) Tolerance
d<5.0 ± 0.15
5.0 <=d<15.0 ± 0.2
15.0 <=d
± 0.3
* ( ) : Reference dimensions
g MOLEX JAPAN CO., LTD.
made connector 5267-03A
Recommended connector
on the inserted side
Housing : 5264-03
Terminal : 5263 PBT etc
s Absolute Maximum Ratings
(Ta= 25˚C )
Input
Output
Parameter
Forward current
*1Peak forward current
Reverse voltage
Power dissipation
Collector-emitter voltage
Emitter-collector voltage
Collector current
Collector power dissipation
*2Operating temperature
*2 Storage temperature
Symbol
IF
I FM
VR
P
V CEO
V ECO
IC
PC
T opr
T stg
Rating
50
1
6
75
35
6
20
75
- 25 to + 75
- 40 to + 85
*1 Pulse width<= 100 µs, Duty ratio= 0.01
*2 The connector should be plugged in/out and the unit's hook should be used at normal temperature
Unit
mA
A
V
mW
V
V
mA
mW
˚C
˚C
“ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs,
data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device.”
1 page  
s Precautions for Use
( 1) In this product, the PWB is fixed with a hook, and cleaning solvent may remain inside the
case; therefore, dip cleaning or ultrasonic cleaning are prohibited.
( 2) Remove dust or stains, using an air blower or a soft cloth moistened in cleaning solvent.
However, do not perform the above cleaning using a soft cloth with cleaning solvent in the
marking portion.
In this case, use only the following type of cleaning solvent for wiping off:
Ethyl alcohol, Methyl alcohol, Isopropyl alcohol
When the cleaning solvents except for specified materials are used, please consult us.
( 3) As for other general cautions, refer to the chapter“ Precautions for Use ”.
GP1S09
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet GP1S09.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| GP1S01 | HIGH SPEED PHOTOINTERRUPTER | Sharp Electrionic Components |
| GP1S01F | HIGH SPEED PHOTOINTERRUPTER | Sharp Electrionic Components |
| GP1S036HEZ | Photointerrupter for Detecting Tilt Direction |  Sharp |
| GP1S05 | WIDE GAP HIGH SENSING ACCURACY TYPE PHOTOINTERRUPTER | Sharp Electrionic Components |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |