DataSheet26.com

CDX-M60UI PDF даташит

Спецификация CDX-M60UI изготовлена ​​​​«Sony» и имеет функцию, называемую «FM/AM COMPACT DISC PLAYER SERVICE MANUAL».

Детали детали

Номер произв CDX-M60UI
Описание FM/AM COMPACT DISC PLAYER SERVICE MANUAL
Производители Sony
логотип Sony логотип 

30 Pages
scroll

No Preview Available !

CDX-M60UI Даташит, Описание, Даташиты
CDX-M60UI/MR60UI
SERVICE MANUAL
Ver. 1.1 2009.02
US Model
Canadian Model
CDX-M60UI
AEP Model
UK Model
CDX-MR60UI
E Model
CDX-M60UI
Photo: CDX-MR60UI
• The tuner and CD sections have no adjustments.
AUDIO POWER SPECIFICATIONS
(CDX-M60UI)
CEA2006 Standard
Power Output: 17 Watts RMS × 4 at
4 Ohms <1 % THD + N
SN Ratio: 82 dBA
(reference: 1 Watt into 4 Ohms)
Model Name Using Similar Mechanism
CD Drive Mechanism Type
Optical Pick-up Name
CDX-GT630UI
MG-101Z-188//Q
DAX-25A
SPECIFICATIONS
CD Player section
Signal-to-noise ratio: 120 dB
Frequency response: 10 – 20,000 Hz
Wow and utter: Below measurable limit
Tuner section
FM
Tuning range:
CDX-M60UI:
87.5 – 108.0 MHz (at 50 kHz step)
87.5 – 107.9 MHz (at 200 kHz step)
CDX-MR60UI: 87.5 – 108.0 MHz
FM tuning interval:
CDX-M60UI: 50 kHz/200 kHz switchable
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency: 150 kHz
Usable sensitivity: 10 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 70 dB (mono)
Separation: 40 dB at 1 kHz
Frequency response: 20 – 15,000 Hz
AM (CDX-M60UI)
Tuning range:
531 – 1,602 kHz (at 9 kHz step)
530 – 1,710 kHz (at 10 kHz step)
AM tuning interval:
9 kHz/10 kHz switchable
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency: 25 kHz
Sensitivity: 26 μV
USB Player section
Interface: USB (Full-speed)
Maximum current: 500mA
Power amplier section
Outputs: Speaker outputs (sure seal connectors)
Speaker impedance: 4 – 8 ohms
Maximum power output: 52 W × 4 (at 4 ohms)
– Continued on next page –
MW/LW (CDX-MR60UI)
Tuning range:
MW: 531 – 1,602 kHz
LW: 153 – 279 kHz
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency: 25 kHz
Sensitivity:
MW: 26 μV, LW: 45 μV
CDX-M60UI
FM/AM COMPACT DISC PLAYER
CDX-MR60UI
FM/MW/LW COMPACT DISC PLAYER
9-889-364-02
2009B04-1
© 2009.02
Sony Corporation
Audio&Video Business Group
Published by Sony Techno Create Corporation









No Preview Available !

CDX-M60UI Даташит, Описание, Даташиты
CDX-M60UI/MR60UI
General
Output:
Audio outputs terminal (front/rear)
Subwoofer output terminal (mono)
Power antenna (aerial) relay control terminal
Power amplier control terminal
Inputs:
Remote controller input terminal
Antenna (aerial) input terminal
Telephone ATT control terminal
Illumination control terminal
BUS control input terminal
BUS audio input terminal
AUX input jack (stereo mini jack)
BUS signal input terminal
Tone controls:
Low: ±10 dB at 60 Hz (XPLOD)
Mid: ±10 dB at 1 kHz (XPLOD)
High: ±10 dB at 10 kHz (XPLOD)
Power requirements: 12 V DC boat battery
(negative ground (earth))
Dimensions: Approx. 178 × 50 × 182 mm
(7 1/8 × 2 × 7 1/4 in.) (w/h/d)
Mounting dimensions: Approx. 182 × 53 × 162 mm
(7 1/4 × 2 1/8 × 6 1/2 in.) (w/h/d)
Mass: Approx. 1.3 kg (2 lb. 14 oz.)
Supplied accessories:
Card remote commander: RM-X151
Parts for installation and connections (1 set)
Design and specications are subject to change
without notice.
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT
The laser diode in the optical pick-up block may suffer electrostat-
ic break-down because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The exible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused
on the disc reective surface by the objective lens in the optical
pickup block. Therefore, when checking the laser diode emission,
observe from more than 30 cm away from the objective lens.
NOTES ON CHIP COMPONENT REPLACEMENT
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
TEST DISCS
Please use the following test discs for the check on the CD section.
YDES-18 (Part No. 3-702-101-01)
PATD-012 (Part No. 4-225-203-01)
CAUTION
Use of controls or adjustments or performance of procedures
other than those specied herein may result in hazardous radia-
tion exposure.
If the optical pick-up block is defective, please replace the whole
optical pick-up block.
Never turn the semi-xed resistor located at the side of optical
pick-up block.
optical pick-up
SAFETY-RELATED COMPONET WARNING!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE
WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR
LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONC-
TIONNEMENT. NE REMPLACER CES COMPOSANTS QUE
PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DON-
NÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS
PUBLIÉS PAR SONY.
2
semi-fixed resistor









No Preview Available !

CDX-M60UI Даташит, Описание, Даташиты
CDX-M60UI/MR60UI
This compact disc player is classied as a CLASS 1 LASER
product. The CLASS 1 LASER PRODUCT label is located on the
exterior.
This label is located on the bottom of the chassis.
CD Play back
You can play CD-DA (also containing CD TEXT) and CD-R/
CD-RW (MP3/WMA/AAC les).
Type of disc
Label on the disc
CD-DA
MP3
WMA
AAC
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40 °C higher
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to ow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
TABLE OF CONTENTS
1. SERVICE NOTES ................................................... 4
2. GENERAL
Location of Controls ....................................................... 5
Connections .................................................................... 6
3. DISASSEMBLY
3-1. Sub Panel Assy ............................................................... 9
3-2. CD Mechanism Block..................................................... 9
3-3. Main Board ..................................................................... 10
3-4. Servo Board .................................................................... 10
3-5. Chassis (T) Sub Assy ...................................................... 11
3-6. Roller Arm Assy.............................................................. 11
3-7. Chassis (OP) Assy........................................................... 12
3-8. Chucking Arm Sub Assy................................................. 12
3-9. Sled Motor Assy.............................................................. 13
3-10. Optical Pick-up Section .................................................. 14
3-11. Optical Pick-up ............................................................... 14
4. DIAGRAMS
4-1. Block Diagram –Main Section– ..................................... 15
4-2. Block Diagram –Display Section– ................................. 16
4-3. Printed Wiring Board –Main Section–............................ 18
4-4. Schematic Diagram –Main Section (1/3)–...................... 19
4-5. Schematic Diagram –Main Section (2/3)–...................... 20
4-6. Schematic Diagram –Main Section (3/3)–...................... 21
4-7. Printed Wiring Board –Sub Section–.............................. 22
4-8. Schematic Diagram –Sub Section–................................. 23
4-9. Printed Wiring Boards –Key Section–............................ 24
4-10. Schematic Diagram –Key Section– ................................ 25
5. EXPLODED VIEWS
5-1. Main Section ................................................................... 31
5-2. Front Panel Section......................................................... 32
5-3. CD Mechanism Section (MG-101Z-188//Q).................. 33
6. ELECTRICAL PARTS LIST .............................. 34
3










Скачать PDF:

[ CDX-M60UI.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
CDX-M60UIFM/AM COMPACT DISC PLAYER SERVICE MANUALSony
Sony

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск