DataSheet26.com

NTCALUG01A104G PDF даташит

Спецификация NTCALUG01A104G изготовлена ​​​​«Vishay» и имеет функцию, называемую «Standard Lug Sensors».

Детали детали

Номер произв NTCALUG01A104G
Описание Standard Lug Sensors
Производители Vishay
логотип Vishay логотип 

3 Pages
scroll

No Preview Available !

NTCALUG01A104G Даташит, Описание, Даташиты
www.vishay.com
NTCALUG01A Series
Vishay BCcomponents
NTC Thermistors, Standard Lug Sensors
QUICK REFERENCE DATA
PARAMETER
VALUE
UNIT
Resistance value at 25 °C (2)
4.7K to 100K
Tolerance on R25-value (2)
B25/85-value
Tolerance on B25/85-value
Operating temperature range at:
± 2, ± 3, ± 5
3984 to 4190
± 0.5 to ± 1.5
%
K
%
Zero dissipation
- 40 to + 150
°C
Maximum dissipation
0 to + 55
Dissipation factor (3)
23 mW/K
Thermal time constant (3)
7.5
s
Min. dielectric withstanding
voltage between terminals and lug
1500 (1 s)
VAC
Insulation resistance between
terminals and lug at 500 VDC
Climatic category (LCT/UCT/days)
min. 100
40/150/56
M
Weight
1.6 g
Notes
(2) Other R25-values and tolerances are available upon request
(3) Measured with screw mounted on an aluminium heatsink of
100 cm2, thickness 1.5 mm, in still air at Tamb = + 25 °C
PACKAGING
The thermistors are packed in cardboard boxes; the
smallest packaging quantity is 500 units.
MOUNTING
• By means of M3 screw. Leads to be soldered or crimped
• The device is suitable for screwing e.g. on metal surface
• The leads are suitable for soldering e.g. on PCB
• Other screw sizes are available on request
FEATURES
• Easy mounting using ring tongue terminal
• Rugged construction
• Cable of PTFE insulation acoording to
NEMA HP-3, type E, rated 600 VRMS (1)
• AEC-Q200 qualified (grade 1)
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
Note
(1) Formerly MIL-W-16878/4, type E
APPLICATIONS
• Suitable for surface sensing applications, especially when
a good electrical insulation and a good thermal contact
with the chassis is required.
• Thermistor with negative temperature coefficient and two
stranded PTFE insulated copper leads.
• The device is mounted inside the barrel of the ring tongue
terminal.
DIMENSIONS
Dia hole D1
D2
L2
L1
L3 max.
T
90169 a
L1 = 38.1 mm ± 3.8 mm
L2 = 3.81 mm ± 0.64 mm
For info: D1 = 3.68 mm, D2 = 7.14 mm, L3 = 16.26 mm, T = 1.016 mm
Notes
• The thermistor chip NTC is epoxy coated and attached to the
metal lug via a middle buffer layer
• Metal ring lug is tinned copper
• Insulated leads: AWG # 24 stranded, PTFE insulation,
Ø 1.12 mm
• Lead wire end twisted and tinned, other lead length and
insulation, available on request
DESIGNERS TOOL
• Other resistance curves and tolerances are available on
request
• Consult Vishay for other lead length, other connector
crimping or other features
• 3D solid models: www.vishay.com/doc?29106
• NTC curve computation:
www.vishay.com/resistors-non-linear/curve-computation-list/
Revision: 08-Aug-12
1 Document Number: 29092
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000









No Preview Available !

NTCALUG01A104G Даташит, Описание, Даташиты
www.vishay.com
NTCALUG01A Series
Vishay BCcomponents
ELECTRICAL DATA AND ORDERING INFORMATION
VISHAY SAP ORDERING
NUMBER
R25-VALUE
()
R25 TOL.
(± %)
B25/85-VALUE
(K)
NTCALUG01A472H
4700 3 3984
NTCALUG01A103G
10 000
2
3984
NTCALUG01A103H
10 000
3
3984
NTCALUG01A103J (1)
10 000
5
3984
NTCALUG01A473H
47 000
3
4090
NTCALUG01A104G
100 000
2
4190
Note
(1) NTCALUG01A103J identical to NTCALUGE2C90169 = 2381 645 90169
B25/85 TOL.
(± %)
0.5
0.5
0.5
0.5
1.5
1.5
DESCRIPTION
NTC Lug01 4.7K 3 % 3984K
PTFE awg#24 38 mm
NTC Lug01 10K 2 % 3984K
PTFE awg#24 38 mm
NTC Lug01 10K 3 % 3984K
PTFE awg#24 38 mm
NTC Lug01 10K 5 % 3984K
PTFE awg#24 38 mm
NTC Lug01 47K 3 % 4090K
PTFE awg#24 38 mm
NTC Lug01 100K 2 % 4190K
PTFE awg#24 38 mm
Revision: 08-Aug-12
2 Document Number: 29092
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000









No Preview Available !

NTCALUG01A104G Даташит, Описание, Даташиты
www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
1 Document Number: 91000










Скачать PDF:

[ NTCALUG01A104G.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
NTCALUG01A104GStandard Lug SensorsVishay
Vishay

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск