|
|
PDF CD4066 Data sheet ( Hoja de datos )
| Número de pieza | CD4066 | |
| Descripción | QUAD BILATERAL SWITCH | |
| Fabricantes | Unisonic Technologies | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de CD4066 (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
|
No Preview Available !
UNISONIC TECHNOLOGIES CO., LTD
CD4066
QUAD BILATERAL SWITCH
DESCRIPTION
The UTC CD4066 is a quad bilateral switch which can be applied
for switching of analog signals and digital signals. When control
input CONT is set to “H” level, the impedance between input and
output of the switch becomes low and when it is set to “L” level, the
impedance becomes high. It has a much lower “ON” resistance,
and “ON” resistance is relatively constant over the input-signal
range.
FEATURES
* 15V Digital or ±7.5V Peak-to-Peak Switching
* 85-Ω Typical On-State Resistance for 15V Operation
* High noise immunity 0.45 VDD (typ.)
* Matched “ON” resistance ∆RON=5Ω (typ.) over 15V signal input
* High degree linearity 0.1% distortion (typ.)
@ fIS=1kHz, VIS=5VP-P, VDD-VSS=5V, RL=10kΩ
* Extremely low “OFF” 0.1nA (typ.)
switch leakage: @ VDD-VSS=10V, TA=25°C
* Extremely high control input impedance 1012Ω (typ.)
* Frequency response, switch “ON” 40 MHz (typ.)
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
CD4066L-D14-T
CD4066G-D14-T
Package
DIP-14
CMOS IC
DIP-14
Packing
Tube
www.unisonic.com.tw
Copyright © 2012 Unisonic Technologies Co., Ltd
1 of 8
QW-R502-739.A
1 page  
CD4066
CMOS IC
AC ELECTRICAL CHARACTERISTICS
(TA=25°C, tR=tF=20nS and VSS=0V, unless otherwise specified) (Note 1)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN TYP MAX UNIT
Propagation Delay Time Signal
tPHL, tPLH
VCON=VDD, CL=5pF,
RL=200kΩ (Fig. 1)
VDD=5V
VDD=10V
VDD=15V
25 55 ns
15 35 ns
10 25 ns
Propagation Delay Time
Control Input to Signal
Output High Impedance to Logical Level
tPZH, tPZL
RL=1kΩ, CL=50pF,
(Fig. 2, 3)
VDD=5V
VDD=10V
VDD=15V
125 ns
60 ns
50 ns
Propagation Delay Time
Control Input to Signal
Output Logical Level to High Impedance
tPHZ, tPLZ
RL=1kΩ, CL=50pF,
(Fig. 2, 3)
VDD=5V
VDD=10V
VDD=15V
125 ns
60 ns
50 ns
Sine Wave Distortion
VCON=VDD=5V, VSS=-5V, RL=10kΩ,
VIS=5Vp-p, f=1kHz (Fig. 4)
0.1
%
Frequency Response-Switch “ON”
(Frequency at -3dB)
VCON=VDD=5V, VSS=-5V, RL=1kΩ,
20 Log10(VOS/VIS)=-3dB,
VIS=5.0Vp-p (Fig. 4)
40 MHz
Feedthrough - Switch “OFF”
(Frequency at -50dB)
VDD=5.0V, VCC=VSS=-5.0V,
RL=1kΩ, VIS=5.0Vp-p,
20 Log10(VOS/VIS)=-50dB (Fig. 4)
1.25 MHz
Crosstalk Between Any Two Switches
(Frequency at -50dB)
VDD=VCON(A)=5.0V, RL=1kΩ,
VSS=VCON (B)=5.0V, VIS(A)=5.0Vp-p,
0.9 MHz
20 Log10(VOS(B)/VIS(A))=-50dB(Fig. 5)
Crosstalk, Control Input to Signal Output
VDD=10V, RL=10kΩ, RIN=1kΩ,
VCC=10V Square Wave,
CL=50pF (Fig. 6)
150 mVP-
P
Maximum Control Input
RL=1kΩ, CL=50pF,
VOS(f)=½ VOS(1kHz)
(Fig. 7)
VDD=5V
VDD=10V
VDD=15V
6 MHz
8 MHz
8.5 MHz
Signal Input Capacitance
CIS
8.0 pF
Signal Output Capacitance
COS
VDD=10V
8.0 pF
Feedthrough Capacitance
CIOS
VCON=0V
0.5 pF
Control Input Capacitance
CIN
5.0 7.5 pF
Notes:1. AC Parameters are guaranteed by DC correlated testing.
2. These devices should not be connected to circuits with the power “ON”.
3. In all cases, there is approximately 5 pF of probe and jig capacitance in the output; however, this
capacitance is included in CL wherever it is specified.
4. VIS is the voltage at the in/out pin and VOS is the voltage at the out/in pin. VCON is the voltage at the control
input.
5. Conditions for VIHC:
a) VIS=VDD, IOS=standard B series IOH
b) VIS=0V, IOL= standard B series IOL
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 8
QW-R502-739.A
5 Page | ||
| Páginas | Total 8 Páginas | |
| PDF Descargar | [ Datasheet CD4066.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| CD4060A | CMOS 14-Stage Ripple Carry Binary Counter / Divider and Oscillator |  RCA |
| CD4060B | CMOS 14-Stage Ripple Carry Binary Counter / Divider and Oscillator |  General Electric Solid State |
| CD4060B | CMOS 14-STAGE RIPPLE-CARRY BINARY COUNTER/DIVIDER AND OSCLLLATOR |  Texas Instruments |
| CD4060BC | 14-Stage/ 12-Stage Ripple Carry Binary Counters |  National Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |