DataSheet26.com

OPB755NZ PDF даташит

Спецификация OPB755NZ изготовлена ​​​​«OPTEK Technologies» и имеет функцию, называемую «Reflective Object Sensor».

Детали детали

Номер произв OPB755NZ
Описание Reflective Object Sensor
Производители OPTEK Technologies
логотип OPTEK Technologies логотип 

4 Pages
scroll

No Preview Available !

OPB755NZ Даташит, Описание, Даташиты
Reflective Object Sensor
OPB750N, OPB750T
OPB755NZ, OPB755TZ, OPB755TAZ
Features:
High contrast ratio (1,000 :1 minimum)
Low cost plastic housing
PCBoard mount (OPB750N, OPB750T)
12” (305 mm) 26 AWG wires (OPB755NZ, OPB755TZ)
Available with no-mounting tabs “N” package
Available with two mounting tabs “T” package
OPB750
Product Photo Here
OPB755TAZ OPB755TZ
Description:
Each sensor in the OPB750 and OPB755 series has a reflective assembly that features a Light
Emitting Diode (LED) and phototransistor output designed to decrease low-level light, while not
affecting the high-level light gain.
The OPB750N and OPB750T devices have are designed for PCBoard mounting with 0.40” (10 mm)
length leads. OPB755NZ, OPB755TZ and OPB755TAZ assemblies are designed for remote
mounting. The OPB755NZ and OPB755TZ have 12” (305 mm) UL rated wire, 26 AWG wire leads
that terminate into an AMP # 3-640442-5 connector. The OPB755TAZ has 24” (610 mm) UL rated
wire, 26 AWG leads. The OPB750T, OPB755TZ and OPB755TAZ have two mounting tabs while
the OPB750N and OPB755NZ have no mounting tabs.
Photologic® output versions are available with the OPB760 and OPB770 series.
Custom electrical, wire and cabling and connectors are available. Contact your local representative
or OPTEK for more information.
Applications:
Non-contact reflective object
sensor
Assembly line automation
Machine automation
Machine safety
End of travel sensor
Ordering Information
Part
Number
LED Peak
Reflection Distance
Wavelength Sensor
Inch
0.080" (2.03 mm)
OPB750N
0.150" (3.81 mm)
890 nm
Transistor
& Rbe
0.220" (5.59 mm)
0.080" (2.03 mm)
OPB750T
0.150" (3.81 mm)
0.220" (5.59 mm)
0.080" (2.03 mm)
OPB755NZ
0.150" (3.81 mm)
0.220" (5.59 mm)
OPB755TZ
890 nm
Transistor
& Rbe
0.080" (2.03 mm)
0.150" (3.81 mm)
0.220" (5.59 mm)
0.080" (2.03 mm)
OPB755TAZ
0.150" (3.81 mm)
0.220" (5.59 mm)
Lead
Length
0.40"
12" / 26
AWG Wire
with
connector
24" / 26
AWG Wire
NO
connector
Tabs
No tabs
2 Tabs
No tabs
2 Tabs
RoHSOPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected]
Issue A.3 05/08
Page 1 of 4









No Preview Available !

OPB755NZ Даташит, Описание, Даташиты
Reflective Object Sensor
OPB750N, OPB750T
OPB755NZ, OPB755TZ, OPB755TAZ
OPB750N
OPB750T
Reflective Surface
Reflective Surface
[ MILLIMETERS]
DIMENSIONS ARE IN:
INCHES
1 23
4
OPB750
Pin # Description
1 Cathode
2 Anode
4 Collector
3 Emitter
OPB755NZ
OPB755TZ
5 43
1
OPB755
Color Description
Black-5
Red-4
Cathode
Anode
White-1 Collector
Green-3 Emitter
OPB755TAZ
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.3 05/08
Page 2 of 4
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected]









No Preview Available !

OPB755NZ Даташит, Описание, Даташиты
Reflective Object Sensor
OPB750N, OPB750T
OPB755NZ, OPB755TZ, OPB755TAZ
Absolute Maximum Ratings (TA=25°C unless otherwise noted)
Operating and Storage Temperature Range
OPB750N, OPB750T
OPB755NZ, OPB755TZ, OPB755TAZ
Lead Soldering Temperature(1)
Input Diode
Forward DC Current
Peak Forward Current (1 µ pulse width, 300 pps)
Reverse DC Voltage
Power Dissipation
Output Phototransistor
Collector-Emitter Voltage
Collector DC Current
Power Dissipation(3)
Electrical Characteristics (TA = 25°C unless otherwise noted)
SYMBOL
PARAMETER
MIN TYP MAX UNITS
-40° C to + 85° C
-40° C to + 80° C
260° C
50 mA
1A
2V
100 mW
24 V
30 V
100 mW
TEST CONDITIONS
Input Diode (See OP240 for additional information)
VF Forward Voltage
--
IR Reverse Current
--
Output Phototransistor (see OP550 for additional information)
1.8
100
V IF = 40 mA
µA VR = 2 V
V(BR)CEO Collector-Emitter Breakdown Voltage 24 -
-
V IC = 100 µA
ICEO
Coupled
Collector Dark Current
- - 100 nA VCE = 10 V, IF = 0, H = 0
VCE(SAT) Saturation Voltage
IC(OFF)
Off-State Collector Current(5)
- - .40 V IC = 150 µA, IF = 30 mA, d = 0.22”
-
-
250
nA
IF = 30 mA, VCE = 5 V
d = 0.08”, 0.15”, 0.22”
IC(ON) On-State Collector Current(4)
500 -
-
IF = 30 mA, VCE = 5 V, d = 0.08”
375 - - µA IF = 30 mA, VCE = 5 V, d = 0.15”
250 -
-
IF = 30 mA, VCE = 5 V, d = 0.22”
Notes:
(1) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.
(2) Derate linearly 1.67 mW/° C above 25° C.
(3) Methanol or isopropanol are recommended as cleaning agents. Plastic housing is soluble in chlorinated hydrocarbons and
ketones.
(4) Photocurrent is measured using an Eastman Kodak neutral white test card having 90% diffuse reflectance as a reflecting
surface. Reference: Eastman Kodak, Catalog #E 152 7795.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected]
Issue A.3 05/08
Page 3 of 4










Скачать PDF:

[ OPB755NZ.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
OPB755NReflective Object SensorOPTEK Technologies
OPTEK Technologies
OPB755NZReflective Object SensorOPTEK Technologies
OPTEK Technologies

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск