|
|
PDF C2839 Data sheet ( Hoja de datos )
| Número de pieza | C2839 | |
| Descripción | NPN Transistor - 2SC2839 | |
| Fabricantes | Sanyo | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de C2839 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
Ordering number:EN733D
NPN Epitaxial Planar Silicon Transistor
2SC2839
HF Amplifier Applications
Features
· Very small package enabiling compactness and
slimness of sets.
· High fT and small cre (fT=320MHz typ, cre=0.95pF
typ).
Package Dimensions
unit:mm
2033
[2SC2839]
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Symbol
Collector-to-Base Voltage
Collector-to-Emitter Voltage
Emitter-to-Base Voltage
Collector Current
Collector Dissipation
Junction Temperature
VCBO
VCEO
VEBO
IC
PC
Tj
Storage Temperature
Tstg
Electrical Characteristics at Ta = 25˚C
Conditions
Parameter
Symbol
Conditions
Collector Cutoff Current
Emitter Cutoff Current
DC Current Gain
Gain-Bandwidth Product
Reverse Transfer Capacitance
Base-to-Collector Time Constant
Noise Figure
Power Gain
ICBO
IEBO
hFE
fT
Cre
rbb'CC
NF
PG
VCB=10V, IE=0
VEB=4V, IC=0
VCE=6V, IC=1mA
VCE=6V, IC=1mA
VCB=6V, f=1MHz
VCE=6V, IC=1mA, f=31.9MHz
VCE=6V, IC=1mA, f=100MHz
VCE=6V, IC=1mA, f=100MHz
* : The 2SC2839 are classified as follows by hFE at 1mA : 60 D 120 100 E 200 160 F 320
B : Base
C : Collector
E : Emitter
SANYO : SPA
Ratings
30
20
5
30
150
125
–55 to +125
Unit
V
V
V
mA
mW
˚C
˚C
Ratings
min typ
60*
200 320
0.7 0.95
12
3.0
25
max
0.1
0.1
320*
1.3
20
Unit
µA
µA
MHz
pF
ps
dB
dB
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
N1098HA (KT)/3107KI/3085KI/7283KI, TS No.733–1/5
1 page  
2SC2839
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of November, 1998. Specifications and information herein are subject
to change without notice.
PS No.733–5/5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet C2839.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| C2837 | NPN Transistor - 2SC2837 |  SavantIC |
| C2838 | NPN Transistor - 2SC2838 |  Savant |
| C2839 | NPN Transistor - 2SC2839 | Sanyo |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |