|
|
Número de pieza | GS7001 | |
Descripción | High Accuracy Linear Li-Lon Battery Charger | |
Fabricantes | GSM | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de GS7001 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! HX1001
GS7001
High Accuracy Linear Li-Lon Battery Charger
Features
Preset 8.4V Charge Voltage with 1%
Accuracy
Pre-Charging, the Charge Current is
adjustable
( )Ideal for Dual-Cell 8.4V Li-Ion Batteries
Constant -Current Charging, the Charge
Current is adjustable
Constant-Voltage Charging
Constant-Current/Constant-Voltage
Charging with Temperature Monitoring
Automatic Recharge
Double LEDs Charge Status Indication
Available in SOP-8L Package
Applications
Charger for Li-Ion Coin Cell Batteries
Portable MP3 Players, Wireless Headsets
Bluetooth Applications
Multifunction Wristwatches
Description
The GS7001 is a complete constant-current/
constant voltage linear charger for cell
lithium-ion batteries. Its package and low
external component count make the GS7001
ideally suited for portable applications. The
charge current can be programmed externally
with a single resistor. GS7001 determines the
charge mode by detecting the battery voltage:
Pre-charge, constant current charging, constant
voltage charging. The charge current of
pre-charging and constant –current charging is
adjustable. The GS7001 is monitored by
temperature monitor during the constant-current
and constant-voltage charging. There are two
LEDs indicate the charge mode.
The GS7001 charger converters are available in
the SOP-8L packages (or upon request).
TEL:0755-27668758/29469758
web:http://www.zgsemi.com
1
www.086ic.cn
1 page GS7001
Application Information
PIN ASSIGNMENT
CHRG1 (Pin 1): Charge Status Indication. When the battery is charging, the CHRG1 pin is pulled low.
When the charge cycle is completed or reverse battery lockout / No AC is detected, CHRG is forced
high impedance. The battery is not working properly or when the temperature exceeds the set range,
output 50% duty cycle of 2Hz pulse, the PIN is available through 330 ohm resistors and indicates that
the light-emitting diode connected.
TS (Pin 2): Temperature Sense.
GND (Pin 3): Ground.
VOUT (Pin 4): Charge Current Output. It should be bypassed with at least a 10uF capacitor. It
provides charge current to the battery and regulates the final float voltage to 8.4V.
PDRI (Pin 5): Driving side. Connect to the grid of the PMOS.
CS (Pin 6): Charge Current Program, Charge Current Monitor and Shutdown Pin. The charge current
is programmed by connecting a resistor, RSET, ISET = V(CS)/RSET.
CHRG2 (Pin 7): End-of-Charge Status Indication. When the battery is charging, the CHRG2 pin is
forced high impedance. When the charge cycle is completed, CHRG2 is pulled GND.
VIN (Pin 8): Positive Input Supply Voltage. It Provides power to the charger VIN and should be
bypassed with a 10uF capacitor.
TEL:0755-27668758/29469758
5
web:http://www.zgsemi.com www.086ic.cn
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet GS7001.PDF ] |
Número de pieza | Descripción | Fabricantes |
GS7001 | High Accuracy Linear Li-Lon Battery Charger | GSM |
GS7005 | Complete Serial Digital Video Receiver | ETC |
GS7005-CQT | Complete Serial Digital Video Receiver | ETC |
GS7005-CTT | Complete Serial Digital Video Receiver | ETC |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |