HFBR-1412TZ Datasheet PDF - Avago
| Part Number | HFBR-1412TZ | |
| Description | 820 nm Miniature Link Fiber Optic Components | |
| Manufacturers | Avago | |
| Logo |  |
|
|
There is a preview and HFBR-1412TZ download ( pdf file ) link at the bottom of this page. Total 24 Pages | ||
Preview 1 page No Preview Available !
HFBR-14xxZ and HFBR-24xxZ Series
Low-Cost, 820 nm Miniature Link Fiber Optic Components
with ST®, SMA, SC and FC Ports
Data Sheet
Description
The 820 nm Miniature Link Series of components is
designed to provide cost-effective, high performance
fiber optic communication links for information systems
and industrial applications with link distances of several
kilometers. With the HFBR-24x6Z, the 125 MHz analog
receiver, data rates of up to 160 MBd can be attained.
Transmitters and receivers are directly compatible with
popular “industry-standard” connectors: ST®, SMA, SC
and FC. They are completely specified with multiple fiber
sizes; including 50/125 µm, 62.5/125 µm, 100/140 µm,
and 200 µm.
Products are available in various options. For example,
transmitters with the improved protection option “P”
show an increased ESD resistance to the pins. This
“HFBR-141xPxZ” integrated solution is realized by includ-
ing a Zener diode parallel to the LED.
The HFBR-14x4Z high power transmitter and HFBR-24x6Z
125 MHz receiver pair up to provide a duplex solution
optimized for 100 Base-SX. 100Base-SX is a Fast Ethernet
Standard (100 Mbps) at 850 nm on multimode fiber.
Evaluation kits are available for ST products, including
transmitter, receiver, eval board and technical literature.
Features
• RoHS compliant
• Meets IEEE 802.3 Ethernet and 802.5 token ring stan-
dards
• Meets TIA/EIA-785 100Base-SX standard
• Low-cost transmitters and receivers
• Choice of ST®, SMA, SC or FC ports
• 820 nm wavelength technology
• Signal rates up to 160 MBd
• Link distances up to several kilometers
• Compatible with 50/125 µm, 62.5/125 µm, 100/140
µm, and 200 µm Plastic-Clad Silica (PCS) Fiber
• Repeatable ST connections within 0.2 dB typical
• Unique optical port design for efficient coupling
• Pick and place, and wave solderable
• No board mounting hardware required
• Wide operating temperature range -40 °C to +85 °C
• Conductive port option
Applications
• 100Base-SX Fast Ethernet on 850 nm
• Media/fiber conversion, switches, routers, hubs and
NICs on 100Base-SX
• Local area networks
• Computer-to-peripheral links
• Computer monitor links
• Digital cross connect links
• Central office switch/PBX links
• Video links
• Modems and multiplexers
• Suitable for Tempest systems
• Industrial control links
ST® is a registered trademark of AT&T.
|
| |
 
Package and Handling Information
Package Information
All transmitters and receivers of the 820 nm Miniature
Link Series are housed in a low-cost, dual-inline package
that is made of high strength, heat resistant, chemically
resistant, and UL 94V-O flame retardant plastic (UL File
#E121562). The transmitters are easily identified by the
light grey color connector port. The receivers are easily
identified by the dark grey color connector port. (Black
color for conductive port). The package is designed for
pick and place and wave soldering so it is ideal for high
volume production applications.
Handling and Design Information
Each part comes with a protective port cap or plug cov-
ering the optics. Note: This plastic or rubber port cap is
made to protect the optical path during assembly. It is
not meant to remain on the part for a long period. These
caps/plugs will vary by port style. When soldering, it is
advisable to leave the protective cap on the unit to keep
the optics clean. Good system performance requires
clean port optics and cable ferrules to avoid obstructing
the optical path.
Clean compressed air often is sufficient to remove par-
ticles of dirt; methanol on a cotton swab also works well.
Recommended Chemicals for Cleaning/Degreasing
820 nm Miniature Link Products
Alcohols: methyl, isopropyl, isobutyl.
Aliphatics: hexane, heptane, Other: soap solution, naph-
tha.
Do not use partially halogenated hydrocarbons (such as
1.1.1 trichloroethane), ketones (such as MEK), acetone,
chloroform, ethyl acetate, methylene dichloride, phe-
nol, methylene chloride, or N-methylpyrolldone. Also,
Avago does not recommend the use of cleaners that use
halogenated hydrocarbons because of their potential
environmental harm.
5
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for HFBR-1412TZ electronic component. |
| Information | Total 24 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ HFBR-1412TZ.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| HFBR-1412T | The function is Miniature Fiber Optic Components. Avago | |
| HFBR-1412TM | The function is Miniature Fiber Optic Components. Avago | |
| HFBR-1412TMZ | The function is 820 nm Miniature Link Fiber Optic Components. Avago | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
HFBR
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||