HCPL-4503 PDF даташит
Спецификация HCPL-4503 изготовлена «Avago» и имеет функцию, называемую «High Speed Optocouplers». |
|
Детали детали
Номер произв | HCPL-4503 |
Описание | High Speed Optocouplers |
Производители | Avago |
логотип |
16 Pages
No Preview Available ! |
HCNW4502/3
HCPL-0452/0453/4502/4503
Single Channel, High Speed Optocouplers
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
These diode-transistor optoc ouplers use an insulating
layer between a LED and an integrated photodetector to
provide electrical insulation between input and output.
Separate connections for the photodiode bias and out-
put-transistor collector increase the speed up to a hun-
dred times that of a conventional phototransistor coupler
by reducing the base-collector capacitance.
These single channel optocouplers are available in
8-Pin DIP, SO-8 and Widebody package configurations.
The HCPL-4502/4503 and HCNW4502/4503 are designed
for high speed TTL/TTL applications. A standard 16 mA TTL
sink current through the input LED will provide enough
output current for 1 TTL load and a 5.6 kΩ pull-up resistor.
CTR for these devices is 19% minimum at IF = 16 mA.
Functional Diagram
NC 1
ANODE 2
CATHODE 3
NC 4
8 VCC
7 NC
6 Vo
5 GND
TRUTH TABLE
(POSITIVE LOGIC)
LED Vo
ON LOW
OFF HIGH
A 0.1 µF bypass capacitor must be connected between pins 5 and 8.
Features
• 15 kV/µs minimum common mode transient
immunity at VCM = 1500 V
• High speed: 1 Mb/s
• TTL compatible
• Available in 8-Pin DIP, SO-8, widebody packages
• Open collector output
• Guaranteed performance from temperature:
0°C to 70°C
• Safety approval
UL Recognized – 3750 Vrms for 1 minute (5000 Vrms
for 1 minute for HCNW and Option 020 devices)
per UL1577
CSA Approved
IEC/EN/DIN EN 60747-5-2 Approved
– VIORM = 630 V peak for HCPL-4503#060
– VIORM = 1414 V peak for HCNW devices
• Dual channel version available (4534/0534)
• MIL-PRF-38534 hermetic version available
(55XX/65XX/4N55)
Applications
• High voltage insulation
• Video signal isolation
• Power transistor isolation in motor drives
• Line receivers
• Feedback element in switched mode power supplies
• High speed logic ground isolation
– TTL/TTL, TTL/CMOS, TTL/LSTTL
• Replaces pulse transformers
• Replaces slow phototransistor isolators
• Analog signal ground isolation
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
No Preview Available ! |
The HCPL-4502, HCPL-0452, and HCNW4502 provide the
electrical and switching performance of the 6N136, HCPL-
0501, and HCNW136 with increased ESD protection.
The HCPL-4503, HCPL-0453, and HCNW4503 are similar to
the HCPL-4502, HCPL-0452, and HCNW4502 optocouplers
but have increased common mode transient immunity of
15 kV/µs minimum at VCM = 1500 V guaranteed.
Schematic
ANODE
2
+
VF
CATHODE
−
3
IF
SHIELD
HCPL-4503/0453
HCNW4503
ICC 8 VCC
IO 6 VO
5 GND
Selection Guide
Minimum CMR
8-Pin DIP (300 Mil)
Small-Outline SO-8
(400 Mil)
Widebody
Hermetic
dV/dt
(V/µs)
VCM
(V)
Current
Transfer
Ratio (%)
Single
Channel
Package
Dual
Channel
Package*
Single
Channel
Package
Dual
Channel
Package*
Single
Channel
Package
Single and
Dual Channel
Packages*
10 19
HCPL-4502
HCPL-0452
HCNW4502
15,000 1500 19
HCPL-4503 HCPL-4534 HCPL-0453 HCPL-0534 HCNW4503
1,000 10 9
HCPL-55XX
HCPL-65XX
4N55
*Technical data for these products are on separate Avago publications.
2
No Preview Available ! |
Ordering Information
HCPL-4502 and HCPL-4503, HCPL-0452, HCPL-0453 are UL Recognized with 3750 Vrms for 1 minute per UL1577.
HCNW4502 and HCNW4503 are UL Recognized with 5000 Vrms for 1 minute per UL1577. All devices above listed are
approved under CSA Component Acceptance Notice #5, File CA 88324.
Part number
HCPL-4502
HCPL-4503
HCPL-0452
HCPL-0453
HCNW4502
HCNW4503
Option
RoHS Non RoHS
Compliant Compliant
-000E
No option
-300E
#300
-500E
#500
-020E
#020
-320E
#320
-520E
#520
-060E
#060
-360E
#360
-560E
#560
-000E
No option
-500E
#500
-060E
#060
-560E
#560
-000E
No option
-300E
#300
-500E
#500
Package
300mil
DIP-8
SO-8
400mil
Widebody
DIP-8
Surface
Mount
X
X
X
X
X
X
X
X
X
X
Gull
Wing
X
X
X
X
X
X
X
X
X
X
Tape
& Reel
X
X
X
X
X
X
UL 5000
IEC/EN/DIN
Vrms/ 1
EN
Minute rating 60747-5-2
X
X
X
X
X
X
X
X
XX
XX
XX
Quantity
50 per tube
50 per tube
1000 per reel
50 per tube
50 per tube
1000 per reel
50 per tube
50 per tube
1000 per reel
100 per tube
1500 per reel
100 per tube
1500 per reel
42 per tube
42 per tube
750 per reel
To order, choose a part number from the part number column and combine with the desired option from the option
column to form an order entry.
Example 1:
HCPL-4502-560E to order product of 300mil DIP Gull Wing Surface Mount package in Tape and Reel packaging with
IEC/EN/DIN EN 60747-5-2 Safety Approval in RoHS compliant.
Example 2:
HCPL-4502 to order product of 300mil DIP package in tube packaging and non RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
Remarks: The notation‘#XXX’is used for existing products, while (new) products launched since 15th July 2001 and RoHS
compliant option will use ‘-XXXE‘.
3
Скачать PDF:
[ HCPL-4503.PDF Даташит ]
Номер в каталоге | Описание | Производители |
HCPL-4502 | HIGH SPEED TRANSISTOR OPTOCOUPLERS | Fairchild Semiconductor |
HCPL-4502 | HIGH SPEED TRANSISTOR OPTOCOUPLERS | QT Optoelectronics |
HCPL-4502 | Single Channel/ High Speed Optocouplers | Agilent(Hewlett-Packard) |
HCPL-4502 | (HCPL-xxxx) HIGH SPEED TRANSISTOR OPTOCOUPLERS | Fairchild Semiconductor |
Номер в каталоге | Описание | Производители |
TL431 | 100 мА, регулируемый прецизионный шунтирующий регулятор |
Unisonic Technologies |
IRF840 | 8 А, 500 В, N-канальный МОП-транзистор |
Vishay |
LM317 | Линейный стабилизатор напряжения, 1,5 А |
STMicroelectronics |
DataSheet26.com | 2020 | Контакты | Поиск |