|
|
PDF SE5023L Data sheet ( Hoja de datos )
| Número de pieza | SE5023L | |
| Descripción | Power Amplifier | |
| Fabricantes | Skyworks Solutions | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SE5023L (archivo pdf) en la parte inferior de esta página. Total 9 Páginas | ||
|
No Preview Available !
DATA SHEET
SE5023L: 5 GHz, +26 dBm Power Amplifier
with Power Detector
Applications
DSSS 5 GHz WLAN (IEEE 802.11ac)
DSSS 5 GHz WLAN (IEEE 802.11n)
Access points, PCMCIA, PC cards
Features
5 GHz matched +24 dBm 802.11ac power amplifier
External analog reference voltage (VREF) for maximum flexibility
Buffered, temperature compensated power detector
1.8% EVM, +24 dBm, 256 QAM, 802.11ac
3% EVM, +26 dBm, 64 QAM, 802.11n
32 dB Gain
Lead-free, RoHS-compliant and halogen-free
(20-pin, 4 4 0.9 mm) QFN package (MSL1, 260 C per
JEDEC J-STD-020)
Description
The SE5023L is a 5 GHz power amplifier offering high linear
power for wireless LAN applications.
The SE5023L offers a high level of integration for a simplified
design, providing quicker time to market and higher application
board production yield. The device integrates all matching
elements, a temperature compensated, load insensitive power
detector with 15 dB of dynamic range and a 3.8 GHz notch filter.
For wireless LAN applications, the device meets the requirements
of IEEE 802.11ac and 802.11n, and delivers approximately
+24 dBm of 802.11ac output power or +26 dBm of 802.11n
output power at 5 V.
A 2.85 V reference voltage on VREF is all that is required to enable
or disable the power amplifier.
A block diagram of the SE5023L is shown in Figure 1. The device
pinout for the 20-pin QFN are shown in Figure 2. Signal pin
assignments and functional pin descriptions are described in
Table 1.
Skyworks Green™ products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of Green™, document number
SQ04-0074.
SP1 SP2
VREF
Bias
RFIN
Input
Match
Intersatage
Match
Intersatage
Match
Output
Match
RFOUT
Detector
VCC1
VCC2 VDET VCC3
Note: RFIN and RFOUT include DC shunt to Ground.
External blocking capacitors are recommended.
Figure 1. SE5023L Block Diagram
ts177
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202521B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 23, 2014
1
1 page  
DATA SHEET • SE5023L: POWER AMPLIFIER WITH POWER DETECTOR
Power Detector Response
1.4
1.2 5150 MHz
5500 MHz
1 5850 MHz
0.8
0.6
0.4
0.2
0
3 5 7 9 11 13 15 17 19 21 23 25 27 29
Output Power (dBm)
Figure 3. SE5023L Power Detector Characteristic over Frequency
Package Dimensions
The PCB layout footprint for the SE5023L is provided in Figure 4.
Typical part markings are shown in Figure 5. Package dimensions
for the 20-pin QFN are shown in Figure 6, and carrier tape
dimensions are provided in Figure 7.
Package Handling Information
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
The SE5023L is rated to Moisture Sensitivity Level 1 (MSL1) at
260 C. It can be used for lead or lead-free soldering. For
additional information, refer to the Skyworks Application Note,
Solder Reflow Information, document number 200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202521B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 23, 2014
5
5 Page | ||
| Páginas | Total 9 Páginas | |
| PDF Descargar | [ Datasheet SE5023L.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SE5023L | Power Amplifier | Skyworks Solutions |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |