DataSheet39.com

What is OKL2-T-3-W12P-C?

This electronic component, produced by the manufacturer "Murata", performs the same function as "Programmable Output 3-Amp iLGA SMT PoLs".


OKL2-T-3-W12P-C Datasheet PDF - Murata

Part Number OKL2-T-3-W12P-C
Description Programmable Output 3-Amp iLGA SMT PoLs
Manufacturers Murata 
Logo Murata Logo 


There is a preview and OKL2-T-3-W12P-C download ( pdf file ) link at the bottom of this page.





Total 17 Pages



Preview 1 page

No Preview Available ! OKL2-T-3-W12P-C datasheet, circuit

www.murata-ps.com
OKL-T/3-W12 Series
Programmable Output 3-Amp iLGA SMT PoLs
Typical unit
FEATURES
iLGA inspectable Land Grid Array
4.5-14Vdc input voltage range
Programmable output voltage from 0.591-5.5Vdc
Drives up to 200 μF ceramic capacitive loads
High power conversion efficiency at 93%
Outstanding thermal derating performance
Short circuit and over current protection
On/Off control and Power Good signal
Optional Sequence/Tracking operation
(OKL2-T/3-W12 models)
Certified to UL/EN/IEC 60950-1 safety, 2nd Edition
RoHS-6 hazardous substance compliance
PRODUCT OVERVIEW
The OKL-T/3-W12 series are miniature
non-isolated Point-of-Load (PoL) DC/DC power
converters for embedded applications. Featuring
inspectable Land Grid Array (iLGA) format, the
OKL-T/3-W12 measures only 0.48 x 0.48 x 0.244
inches max. (12.2 x 12.2 x 6.2 mm max.).
The wide input range is 4.5 to 14 Volts DC.
The maximum output current is 3 Amps. Based
on fixed-frequency synchronous buck converter
switching topology, the high power conversion
efficient Point of Load (PoL) module features
programmable output voltage and On/Off control.
These converters also include under voltage lock
out (UVLO), output short circuit protection, and
over-current protections.
An optional sequence/tracking feature on
OKL2-T/3-W12 models allows power sequencing of
PoL’s. These units are certified to all standard UL/EN/
IEC 60950-1 safety certifications (2nd Edition) and
RoHS-6 hazardous substance compliance.
Connection Diagram
+Vin
F1
On/Off
Control
External
DC
Power
Source
Open = On
Closed = Off
(Positive
On/Off)
Controller
t4XJUDIJOH
t'JMUFST
t$VSSFOU4FOTF
Reference and
Error Amplifier
Common
Sequence/Tracking
(OKL2 Models)
Power Good
Figure 1. OKL-T/3-W12
Note: Murata Power Solutions strongly recommends an external input fuse, F1.
See specifications.
+Vout
Sense
Trim
Common
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com/support
MDC_OKL-T/3-W12 Series.C01 Page 1 of 17

line_dark_gray
OKL2-T-3-W12P-C equivalent
OKL-T/3-W12 Series
Programmable Output 3-Amp iLGA SMT PoLs
OKL-T/3-W12 PERFORMANCE DATA AND OSCILLOGRAMS
OKL2-T/3-W12 Efficiency vs. Line Voltage and Load Current +25 ˚C
(Vout = 5V)
100
OKL-T/3-W12 Maximum Current Temperature Derating at Sea Level
(VIN = 12V, VOUT = 5V)
3.5
95
3.0
90 Natural convection
2.5 100 LFM
85
2.0
VIN = 6V
80
VIN = 12V
1.5
VIN = 14V
75 1.0
70 0.5
65
0
12
Load Curre nt (Amps)
0.0
3 20 30 40 50 60 70 80
Ambient Temperature (ºC)
90
On/Off Enable Startup Delay (Vin=12V, Vout=5.0V, Iout=3A, Cload=0)
Trace 4=Enable In, Trace2=Vout
Output Ripple and Noise (Vin=12V, Vout=5.0V, Iout=3A, Cload=0, ScopeBW=20MHz)
Step Load Transient Response (Vin=12V, Vout=5.0V, Cload=0, Iout=1.5A to 3A)
Trace 2=Vout, 100 mV/div. Trace 4=Iout, 2.5A/div.
Step Load Transient Response (Vin=12V, Vout=5.0V, Cload=0, Iout=3A to 1.5A)
Trace 2=Vout, 100 mV/div. Trace 4=Iout, 2.5A/div.
www.murata-ps.com/support
MDC_OKL-T/3-W12 Series.C01 Page 5 of 17


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for OKL2-T-3-W12P-C electronic component.


Information Total 17 Pages
Link URL [ Copy URL to Clipboard ]
Download [ OKL2-T-3-W12P-C.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
OKL2-T-3-W12P-CThe function is Programmable Output 3-Amp iLGA SMT PoLs. MurataMurata

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

OKL2     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search