DataSheet26.com

SAMG55J19 PDF даташит

Спецификация SAMG55J19 изготовлена ​​​​«ATMEL Corporation» и имеет функцию, называемую «SMART ARM-based Flash MCU».

Детали детали

Номер произв SAMG55J19
Описание SMART ARM-based Flash MCU
Производители ATMEL Corporation
логотип ATMEL Corporation логотип 

30 Pages
scroll

No Preview Available !

SAMG55J19 Даташит, Описание, Даташиты
SAM G55G / SAM G55J
Atmel | SMART ARM-based Flash MCU
DATASHEET
Description
The Atmel® | SMART SAM G55 is a series of Flash microcontrollers based on the
high-performance 32-bit ARM® Cortex®-M4 RISC processor with FPU (Floating
Point Unit). It operates at a maximum speed of 120 MHz and features 512 Kbytes
of Flash and up to 176 Kbytes of SRAM. The peripheral set includes eight flexible
communication units comprising USARTs, SPIs and I2C-bus interfaces (TWIs),
two three-channel general-purpose 16-bit timers, two I2S controllers, one-channel
pulse density modulation, one 8-channel 12-bit ADC, one real-time timer (RTT)
and one real-time clock (RTC), both located in the ultra low-power backup area.
The Atmel | SMART SAM G55 devices have three software-selectable low-power
modes: Sleep, Wait and Backup. In Sleep mode, the processor is stopped while
all other functions can be kept running. In Wait mode, all clocks and functions are
stopped but some peripherals can be configured to wake up the system based on
events, including partial asynchronous wake-up (SleepWalking™). In Backup
mode, RTT, RTC and wakeup logic are running.
For power consumption optimization, the flexible clock system offers the capability
of having different clock frequencies for some peripherals. Moreover, the
processor and bus clock frequency can be modified without affecting the
peripheral processing.
The real-time event management allows peripherals to receive, react to and send
events in Active and Sleep modes without processor intervention.
The SAM G55 devices are general-purpose low-power microcontrollers that offer
high performance, processing power and small package options combined with a
rich and flexible peripheral set. With this unique combination of features, the SAM
G55 series is suitable for a wide range of applications including consumer,
industrial control and PC peripherals.
The device operates from 1.62V to 3.6V and is available in three packages:
49-pin WLCSP, 64-pin QFN and 64-pin LQFP.
Atmel-11289E-ATARM-SAM-G55G-SAM-G55J-Datasheet_30-Nov-15









No Preview Available !

SAMG55J19 Даташит, Описание, Даташиты
Features
Core
̶ ARM Cortex-M4 with up to 16 Kbytes SRAM on I/D bus providing 0 wait state execution at up to
120 MHz (1)
̶ Memory Protection Unit (MPU)
̶ DSP Instructions
̶ Floating Point Unit (FPU)
̶ Thumb®-2 instruction set
Note: 1. 120 MHz with VDDCorext120 or with VDDCore trimmed by regulator.
Memories
̶ Up to 512 Kbytes embedded Flash
̶ Up to 176 Kbytes embedded SRAM
̶ 8 Kbytes ROM with embedded boot loader, single-cycle access at full speed
System
̶ Embedded voltage regulator for single-supply operation
̶ Power-on reset (POR) and Watchdog for safe operation
̶ Quartz or ceramic resonator oscillators: 3 to 20 MHz with clock failure detection and 32.768 kHz for
RTT or system clock
̶ High-precision 8/16/24 MHz factory-trimmed internal RC oscillator. In-application trimming access for
frequency adjustment
̶ Slow clock internal RC oscillator as permanent low-power mode device clock
̶ PLL range from 48 MHz to 120 MHz for device clock
̶ PLL range from 24 MHz to 48 MHz for USB device and USB OHCI
̶ Up to 30 peripheral DMA (PDC) channels
̶ 256-bit General-Purpose Backup Registers (GPBR)
̶ 16 external interrupt lines
Peripherals
̶ 8 flexible communication units supporting:
USART
SPI
Two-wire Interface (TWI) featuring TWI masters and high-speed TWI slaves
̶ USB 2.0 Device and USB Host OHCI with On-chip Transceiver
̶ 2 Inter-IC Sound Controllers (I2S)
̶ 1 Pulse Density Modulation Interface (PDMIC) (supports up to two microphones)
̶ 2 three-channel 16-bit Timer/Counters (TC) with capture, waveform, compare and PWM modes
̶ 1 48-bit Real-Time Timer (RTT) with 16-bit prescaler and 32-bit counter
̶ 1 RTC with calendar and alarm features
̶ 1 32-bit Cyclic Redundancy Check Calculation Unit (CRCCU)
2 SAMG55 [DATASHEET]
Atmel-11289E-ATARM-SAM-G55G-SAM-G55J-Datasheet_30-Nov-15









No Preview Available !

SAMG55J19 Даташит, Описание, Даташиты
I/O
̶ Up to 48 I/O lines with external interrupt capability (edge or level), debouncing, glitch filtering and on-
die series resistor termination. Individually programmable open-drain, pull-up and pull-down resistor
and synchronous output
̶ Two PIO Controllers provide control of up to 48 I/O lines
Analog
̶ One 8-channel ADC, resolution up to 12 bits, sampling rate up to 500 kSps
Package
̶ 49-lead WLCSP
̶ 64-lead LQFP
̶ 64-lead QFN
Temperature operating range
̶ Industrial (-40° C to +85° C)
SAMG55 [DATASHEET]
Atmel-11289E-ATARM-SAM-G55G-SAM-G55J-Datasheet_30-Nov-15
3










Скачать PDF:

[ SAMG55J19.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
SAMG55J19SMART ARM-based Flash MCUATMEL Corporation
ATMEL Corporation
SAMG55J19ASMART ARM-based Flash MCUATMEL Corporation
ATMEL Corporation

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск