DataSheet26.com

ADA4857-1 PDF даташит

Спецификация ADA4857-1 изготовлена ​​​​«Analog Devices» и имеет функцию, называемую «High Speed Op Amp».

Детали детали

Номер произв ADA4857-1
Описание High Speed Op Amp
Производители Analog Devices
логотип Analog Devices логотип 

20 Pages
scroll

No Preview Available !

ADA4857-1 Даташит, Описание, Даташиты
Data Sheet
FEATURES
High speed
850 MHz, −3 dB bandwidth (G = +1, RL = 1 kΩ, LFCSP)
750 MHz, −3 dB bandwidth (G = +1, RL = 1 kΩ, SOIC)
2800 V/µs slew rate
Low distortion: −88 dBc at 10 MHz (G = +1, RL = 1 kΩ)
Low power: 5 mA/amplifier at 10 V
Low noise: 4.4 nV/√Hz
Wide supply voltage range: 5 V to 10 V
Power-down feature
Available in 3 mm × 3 mm 8-lead LFCSP (single), 8-lead SOIC
(single), and 4 mm × 4 mm 16-lead LFCSP (dual)
APPLICATIONS
Instrumentation
IF and baseband amplifiers
Active filters
ADC drivers
DAC buffers
Ultralow Distortion, Low Power,
Low Noise, High Speed Op Amp
ADA4857-1/ADA4857-2
CONNECTION DIAGRAMS
ADA4857-1
TOP VIEW
(Not to Scale)
PD 1
FB 2
–IN 3
+IN 4
8 +VS
7 OUT
6 NC
5 –VS
NOTES
1. NC = NO CONNECT. DO NOT CONNECT
TO THIS PIN.
2. THE EXPOSED PAD MAY BE CONNECTED
TO GND OR VS.
Figure 1. 8-Lead LFCSP (CP)
ADA4857-1
TOP VIEW
(Not to Scale)
FB 1
–IN 2
+IN 3
–VS 4
8 PD
7 +VS
6 OUT
5 NC
NC = NO CONNECT
Figure 2. 8-Lead SOIC (R)
ADA4857-2
TOP VIEW
(Not to Scale)
–IN1 1
+IN1 2
NC 3
–VS2 4
12 –VS1
11 NC
10 +IN2
9 –IN2
GENERAL DESCRIPTION
The ADA4857 is a unity-gain stable, high speed, voltage feedback
amplifier with low distortion, low noise, and high slew rate. With a
spurious-free dynamic range (SFDR) of −88 dBc at 10 MHz, the
ADA4857 is an ideal solution for a variety of applications, including
ultrasounds, ATE, active filters, and ADC drivers. The Analog
Devices, Inc., proprietary next-generation XFCB process and
innovative architecture enables such high performance amplifiers.
The ADA4857 has 850 MHz bandwidth, 2800 V/µs slew rate, and
settles to 0.1% in 15 ns. With a wide supply voltage range (5 V to
Rev. C
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevices for itsuse,nor foranyinfringementsofpatentsor other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
NOTES
1. NC = NO CONNECT. DO NOT CONNECT
TO THIS PIN.
2. THE EXPOSED PAD MAY BE CONNECTED
TO GND OR VS.
Figure 3. 16-Lead LFCSP (CP)
10 V), the ADA4857 is an ideal candidate for systems that require
high dynamic range, precision, and speed.
The ADA4857-1 amplifier is available in a 3 mm × 3 mm, 8-lead
LFCSP and a standard 8-lead SOIC. The ADA4857-2 is available in
a 4 mm × 4 mm, 16-lead LFCSP. The LFCSP features an exposed
paddle that provides a low thermal resistance path to the printed
circuit board (PCB). This path enables more efficient heat transfer
and increases reliability. The ADA4857 works over the extended
industrial temperature range (−40°C to +125°C).
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2008–2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com









No Preview Available !

ADA4857-1 Даташит, Описание, Даташиты
ADA4857-1/ADA4857-2
TABLE OF CONTENTS
Features .............................................................................................. 1
Applications....................................................................................... 1
Connection Diagrams...................................................................... 1
General Description ......................................................................... 1
Revision History ............................................................................... 2
Specifications..................................................................................... 3
±5 V Supply ................................................................................... 3
+5 V Supply ................................................................................... 4
Absolute Maximum Ratings............................................................ 6
Thermal Resistance ...................................................................... 6
Maximum Power Dissipation ..................................................... 6
ESD Caution.................................................................................. 6
Pin Configurations and Function Descriptions ........................... 7
Typical Performance Characteristics ............................................. 9
REVISION HISTORY
9/13—Rev. B to Rev. C
Changes to Figure 1 and Figure 3................................................... 1
Change to Figure 5 ........................................................................... 7
Change to Figure 7 ........................................................................... 8
Updated Outline Dimensions ....................................................... 20
Changes to Ordering Guide .......................................................... 20
8/11—Rev. A to Rev. B
Changes to Table 1 Conditions ....................................................... 3
Changes to Table 2 Conditions ....................................................... 4
Changes to Typical Performance Characteristics Conditions .... 9
Changes to Figure 18...................................................................... 10
Changes to Figure 42...................................................................... 15
Changes to Table 9.......................................................................... 16
Changes to Ordering Guide .......................................................... 20
Data Sheet
Test Circuits..................................................................................... 15
Applications Information .............................................................. 16
Power-Down Operation ............................................................ 16
Capacitive Load Considerations .............................................. 16
Recommended Values for Various Gains................................ 16
Active Low-Pass Filter (LPF) .................................................... 17
Noise ............................................................................................ 18
Circuit Considerations .............................................................. 18
PCB Layout ................................................................................. 18
Power Supply Bypassing ............................................................ 18
Grounding ................................................................................... 18
Outline Dimensions ....................................................................... 19
Ordering Guide .......................................................................... 20
11/08—Rev. 0 to Rev. A
Changes to Table 5.............................................................................7
Changes to Table 7.............................................................................8
Changes to Figure 32...................................................................... 13
Added Figure 44; Renumbered Sequentially .............................. 15
Changes to Layout .......................................................................... 15
Changes to Table 8.......................................................................... 16
Added Active Low-Pass Filter (LFP) Section ............................. 17
Added Figure 48 and Figure 49; Renumbered Sequentially ..... 17
Changes to Grounding Section..................................................... 18
Exposed Paddle Notation Added to Outline Dimensions ........ 19
Changes to Ordering Guide .......................................................... 20
5/08—Revision 0: Initial Version
Rev. C | Page 2 of 20









No Preview Available !

ADA4857-1 Даташит, Описание, Даташиты
Data Sheet
ADA4857-1/ADA4857-2
SPECIFICATIONS
±5 V SUPPLY
TA = 25°C, G = +2, RG = RF = 499 Ω, RS = 100 Ω for G = +1 (SOIC), RL = 1 kΩ to ground, PD = no connect, unless otherwise noted.
Table 1.
Parameter
DYNAMIC PERFORMANCE
–3 dB Bandwidth (LFCSP/SOIC)
Full Power Bandwidth
Bandwidth for 0.1 dB Flatness (LFCSP/SOIC)
Slew Rate (10% to 90%)
Settling Time to 0.1%
NOISE/HARMONIC PERFORMANCE
Harmonic Distortion
Input Voltage Noise
Input Current Noise
DC PERFORMANCE
Input Offset Voltage
Input Offset Voltage Drift
Input Bias Current
Input Bias Current Drift
Input Bias Offset Current
Open-Loop Gain
PD (POWER-DOWN) PIN
PD Input Voltage
Turn-Off Time
Turn-On Time
PD Pin Leakage Current
INPUT CHARACTERISTICS
Input Resistance
Input Capacitance
Input Common-Mode Voltage Range
Common-Mode Rejection Ratio
OUTPUT CHARACTERISTICS
Output Overdrive Recovery Time
Output Voltage Swing
Output Current
Short-Circuit Current
Capacitive Load Drive
Conditions
G = +1, VOUT = 0.2 V p-p
G = +1, VOUT = 2 V p-p
G = +2, VOUT = 0.2 V p-p
G = +1, VOUT = 2 V p-p, THD < −40 dBc
G = +2, VOUT = 2 V p-p, RL = 150 Ω
G = +1, VOUT = 4 V step
G = +2, VOUT = 2 V step
f = 1 MHz, G = +1, VOUT = 2 V p-p (HD2)
f = 1 MHz, G = +1, VOUT = 2 V p-p (HD3)
f = 10 MHz, G = +1, VOUT = 2 V p-p (HD2)
f = 10 MHz, G = +1, VOUT = 2 V p-p (HD3)
f = 50 MHz, G = +1, VOUT = 2 V p-p (HD2)
f = 50 MHz, G = +1, VOUT = 2 V p-p (HD3)
f = 100 kHz
f = 100 kHz
VOUT = −2.5 V to +2.5 V
Chip powered down
Chip enabled
50% off PD to <10% of final VOUT, VIN = 1 V, G = +2
50% off PD to <10% of final VOUT, VIN = 1 V, G = +2
Chip enabled
Chip powered down
Common mode
Differential mode
Common mode
VCM = ±1 V
VIN = ±2.5 V, G = +2
RL = 1 kΩ
RL = 100 Ω
Sinking and sourcing
30% overshoot, G = +2
Min Typ
Max Unit
650 850/750
600/550
400/350
110
75/90
2800
15
MHz
MHz
MHz
MHz
MHz
V/µs
ns
−108
−108
−88
−93
−65
−62
4.4
1.5
dBc
dBc
dBc
dBc
dBc
dBc
nV/√Hz
pA/√Hz
±2 ±4.5 mV
2.3 µV/°C
−2 −3.3 µA
24.5 nA/°C
50 nA
57 dB
≥(VCC − 2)
≤(VCC − 4.2)
55
33
58
80
V
V
µs
ns
µA
µA
8
4
2
±4
−78 −86
MΩ
MΩ
pF
V
dB
10 ns
±4 V
±3.7 V
50 mA
125 mA
10 pF
Rev. C | Page 3 of 20










Скачать PDF:

[ ADA4857-1.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
ADA4857-1High Speed Op AmpAnalog Devices
Analog Devices
ADA4857-2High Speed Op AmpAnalog Devices
Analog Devices

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск