|
|
PDF NCS199A2 Data sheet ( Hoja de datos )
| Número de pieza | NCS199A2 | |
| Descripción | Current-Shunt Monitor | |
| Fabricantes | ON Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NCS199A2 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
NCS199A1, NCS199A2,
NCS199A3
Current-Shunt Monitor,
Voltage Output,
Bi-Directional Zero-Drift
The NCS199A1, NCS199A2 and NCS199A3 are voltage output
current shunt monitors that can measure voltage across shunts at
common−mode voltages from −0.3 V to 26 V, independent of supply
voltage. Three fixed gains are available: 50 V/V, 100 V/V or 200 V/V.
The low offset of the zero−drift architecture enables current sensing
with maximum drops across the shunt as low as 10 mV full−scale.
The devices can operate from a single +2.7 V to +26 V power
supply, drawing a maximum of 100 mA of supply current. All versions
are specified over the extended operating temperature range (–40°C to
+125°C).
Features
• Wide Common−Mode Input Range −0.3 V to 26 V
• Supply Voltage Range from 2.7 V to 26 V
• Low Offset Voltage ±150 mV Max
• Low Offset Drift (0.5 mV/°C)
• Low Gain Error (max 1.5%)
• Rail−to−rail Input and Output Capability
• Low Current Consumption (typ 65 mA, 100 mA max)
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
• These are Pb−free Devices
Typical Applications
• Current Sensing (High−Side/Low−Side)
• Automotive
• Telecom
• Sensors
www.onsemi.com
SC70−6
SQ SUFFIX
CASE 419B
PIN CONNECTIONS
REF 1
GND 2
VS 3
6 OUT
5 IN−
4 IN+
MARKING DIAGRAM
6
XXXMG
G
1
XXX = Specific Device Code (See page 4)
M = Date Code
G = Pb−Free Package
(Note: Microdot may be in either location)
Product
Gain
R3−R4
R1−R2
NCS199A1
50
20 kW
1 MW
NCS199A2 100
10 kW
1 MW
NCS199A3 200
5 kW
1 MW
VOUT + ǒILOAD RSHUNTǓGAIN ) VREF
ORDERING INFORMATION
See detailed ordering, marking and shipping information on
page 4 of this data sheet.
This document contains information on some products that are still under development.
ON Semiconductor reserves the right to change or discontinue these products without
notice.
© Semiconductor Components Industries, LLC, 2016
July, 2016 − Rev. 1
1
Publication Order Number:
NCS199/D
1 page  
NCS199A1, NCS199A2, NCS199A3
PACKAGE DIMENSIONS
E
2X
bbb H D
e
6X ccc C
D
A
65
12
SC−88/SC70−6/SOT−363
CASE 419B−02
ISSUE Y
2X
aaa H D
D
4
E1
L2
3
aaa C
2X 3 TIPS
H
L
DETAIL A
GAGE
PLANE
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSIONS D AND E1 DO NOT INCLUDE MOLD FLASH,
PROTRUSIONS, OR GATE BURRS. MOLD FLASH, PROTRU-
SIONS, OR GATE BURRS SHALL NOT EXCEED 0.20 PER END.
4. DIMENSIONS D AND E1 AT THE OUTERMOST EXTREMES OF
THE PLASTIC BODY AND DATUM H.
5. DATUMS A AND B ARE DETERMINED AT DATUM H.
6. DIMENSIONS b AND c APPLY TO THE FLAT SECTION OF THE
LEAD BETWEEN 0.08 AND 0.15 FROM THE TIP.
7. DIMENSION b DOES NOT INCLUDE DAMBAR PROTRUSION.
ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 TOTAL IN
EXCESS OF DIMENSION b AT MAXIMUM MATERIAL CONDI-
TION. THE DAMBAR CANNOT BE LOCATED ON THE LOWER
RADIUS OF THE FOOT.
B
TOP VIEW
6X b
ddd M C A-B D
A2
A
DETAIL A
A1
SIDE VIEW
C
SEATING
PLANE
c
END VIEW
MILLIMETERS
INCHES
DIM MIN NOM MAX MIN NOM MAX
A −−− −−− 1.10 −−− −−− 0.043
A1 0.00 −−− 0.10 0.000 −−− 0.004
A2 0.70 0.90 1.00 0.027 0.035 0.039
b 0.15 0.20 0.25 0.006 0.008 0.010
C 0.08 0.15 0.22 0.003 0.006 0.009
D 1.80 2.00 2.20 0.070 0.078 0.086
E 2.00 2.10 2.20 0.078 0.082 0.086
E1 1.15 1.25 1.35 0.045 0.049 0.053
e 0.65 BSC
0.026 BSC
L 0.26 0.36 0.46 0.010 0.014 0.018
L2 0.15 BSC
0.006 BSC
aaa 0.15
0.006
bbb 0.30
0.012
ccc 0.10
0.004
ddd 0.10
0.004
RECOMMENDED
SOLDERING FOOTPRINT*
6X
0.30
6X
0.66
2.50
0.65
PITCH
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
www.onsemi.com
5
NCS199/D
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet NCS199A2.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NCS199A1 | Current-Shunt Monitor | ON Semiconductor |
| NCS199A2 | Current-Shunt Monitor | ON Semiconductor |
| NCS199A3 | Current-Shunt Monitor | ON Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |