DataSheet.es    


PDF GS2965 Data sheet ( Hoja de datos )

Número de pieza GS2965
Descripción Multi-Rate SDI Reclocker
Fabricantes Semtech 
Logotipo Semtech Logotipo



Hay una vista previa y un enlace de descarga de GS2965 (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! GS2965 Hoja de datos, Descripción, Manual

GS2965
Multi-Rate SDI Reclocker with Equalization & De-emphasis
Features
• SMPTE 424M, SMPTE 292M and SMPTE 259M-C
compliant
• Supports DVB-ASI at 270Mb/s
• Single supply operation at 3.3V or 2.5V
• 180mW typical power consumption (213mW with
RCO enabled) at 2.5V
• Input signal equalization and output-signal
de-emphasis settings to compensate for board-trace
dielectric losses
• 2:1 input multiplexer patented technology
• Choice of dual reclocked data outputs or one reclocked
data output and one clock output
• Uses standard 27MHz crystal
• Differential inputs and outputs
Š support DC coupling to industry-standard
differential logic
Š on-chip 100Ω differential data input/output
termination
Š selectable 400mVppd or 800mVppd output swing
on each output
Š seamless interface to other Gennum products
• 4 wire SPI host interface for device configuration and
monitoring
• Standard logic control and status signal levels
• Auto and Manual modes for rate selection
• Standards indication in Auto mode
• Lock Detect Output
• Mute, Bypass and Autobypass functions
• SD/HD indication output to control GS2978 or GS2988
dual slew-rate cable drivers
• Operating temperature range: -40°C to +85°C
• 32 pin 5mm x 5mm QFN package
• Pb-free and RoHS compliant
Applications
• SMPTE 424M, SMPTE 292M and SMPTE 259M-C
coaxial cable serial digital interfaces
Description
The GS2965 is a multi-rate serial digital reclocker designed
to automatically recover the embedded clock from a digital
video signal and retime the incoming video data. It will
recover the embedded clock signal and retime the data
from a SMPTE 424M, SMPTE 292M, or SMPTE 259M-C
compliant digital video signal.
A serial host interface provides the ability to configure and
monitor multiple GS2965 devices in a daisy-chain
configuration.
Adjustable input trace equalization (EQ) for up to 40” of FR4
trace losses, and adjustable output de-emphasis (DE) for up
to 20” of FR4 trace losses, can be configured via the host
interface.
The GS2965 can operate in either auto or manual rate
selection mode. In Auto mode, the device will
automatically detect and lock onto incoming SMPTE SDI
data signals at any supported rate. For single rate data
systems, the GS2965 can be configured to operate in
Manual mode. In both modes, the device requires only one
external crystal to set the VCO frequency when not locked
and provides adjustment free operation.
The GS2965 accepts industry-standard differential input
levels including LVPECL and CML. The differential data
and clock outputs feature selectable output swing via the
host interface, ensuring compatibility with most
industry-standard, terminated differential receivers.
The GS2965 features dual differential outputs. The second
output can be configured to emit either the recovered clock
signal or the re-timed video data. This output can also be
disabled to save power.
In systems which require passing of non-SMPTE data rates,
the GS2965 can be configured to either automatically or
manually enter a bypass mode in order to pass the signal
without reclocking.
The GS2965 is Pb-free, and the encapsulation compound
does not contain halogenated flame retardant. This
component and all homogeneous sub-components are
RoHS compliant.
GS2965 Multi-Rate SDI Reclocker with Equalization &
De-emphasis
Data Sheet
52462 - 4
July 2012
www.semtech.com
1 of 41
Proprietary & Confidential

1 page




GS2965 pdf
1. Pin Out
1.1 Pin Assignment
LF+
CP_CAP
DDI0
HIF
DDI0
DDI1
DDI1
RSVD
32 31 30 29
1
28 27 26 25
24
2 23
3 22
GS2965
4 21
32-pin QFN
5 20
(top view)
6 19
7 18
8 17
9 10 11 12
13 14 15 16
VEE_DDO0
VCC_DDO0
DDO0
DDO0
VEE_DDO1
VCC_DDO1
DDO1/RCO
DDO1/RCO
Ground Pad
(bottom of package)
Figure 1-1: GS2965 Pin Out
GS2965 Multi-Rate SDI Reclocker with Equalization &
De-emphasis
Data Sheet
52462 - 4
July 2012
5 of 41
Proprietary & Confidential

5 Page





GS2965 arduino
Table 2-2: AC Electrical Characteristics (Continued)
Parameter
Output De-Emphasis
Input Jitter Tolerance
Loop Bandwidth
PLL Lock Time (asynchronous)
PLL Lock Time (synchronous)
Serial Data Output Jitter Intrinsic
(DDO0)
Output Rise/Fall Time
Output Rise/Fall Time Mismatch
Eye Cross Shift
Symbol
Conditions
OFF - 0
ON - 0
ON - 1
ON - 2
ON - 3
ON - 4
ON - 5
ON - 6
ON - 7
square-wave modulated
jitter
BWLOOP
(270Mb/s)
KBB = VCC
KBB = FLOAT
KBB = GND
BWLOOP
(1485Mb/s)
KBB = VCC
KBB = FLOAT
KBB = GND
BWLOOP
(2970Mb/s)
KBB = VCC
KBB = FLOAT
KBB = GND
talock
tslock
CLF = 47nF, SD/HD = 0
CLF = 47nF, SD/HD = 1
tOJ(270MB/s)
KBB = FLOAT
PRN 2^23-1 test pattern
tOJ(1485MB/s)
KBB = FLOAT
PRN 2^23-1 test pattern
tOJ(2970MB/s)
KBB = FLOAT
PRN 2^23-1 test pattern
tr/f 20% to 80% (400mV
swing)
20% to 80% (800mV
swing)
−−
percentage of signal
amplitude
Min Typ Max Units Notes
0 dB
0 dB
0.7 dB
1.3 dB
2 dB
2.6 dB
3.3 dB
4 dB
4.7 dB
0.8 − − UI
170 kHz
340 kHz
680 kHz
0.875
MHz
1.75 MHz
3.5 MHz
1.75 MHz
3.5 MHz
7.0 MHz
0.5 1
ms
0.5 4
μs
5 10 μs
0.01
UI
0.03 UI
0.05 UI
65
ps
80
ps
− − 15 ps
− −5%
GS2965 Multi-Rate SDI Reclocker with Equalization &
De-emphasis
Data Sheet
52462 - 4
July 2012
11 of 41
Proprietary & Confidential

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet GS2965.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
GS2960AHD SD SDI ReceiverSemtech
Semtech
GS2961ReceiverGennum
Gennum
GS2961AHD SD SDI ReceiverSemtech
Semtech
GS29623G/HD/SD-SDI SerializerGENNUM
GENNUM

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar