|
|
PDF NRVTS245ESF Data sheet ( Hoja de datos )
| Número de pieza | NRVTS245ESF | |
| Descripción | Very Low Forward Voltage Trench-based Schottky Rectifier | |
| Fabricantes | ON Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NRVTS245ESF (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
NTS245ESF, NRVTS245ESF,
NTSM245ESF,
NRVTSM245ESF
Product Preview
Very Low Forward Voltage
Trench-based Schottky
Rectifier
Features
• Fine Lithography Trench−based Schottky Technology for Very Low
Forward Voltage and Low Leakage
• Fast Switching with Exceptional Temperature Stability
• Low Power Loss and Lower Operating Temperature
• Higher Efficiency for Achieving Regulatory Compliance
• Low Thermal Resistance
• High Surge Capability
• NRV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q101
Qualified and PPAP Capable
• These are Pb−Free and Halide−Free Devices
Mechanical Characteristics:
• Case: Molded Epoxy
• Epoxy Meets UL 94 V−0 @ 0.125 in
• Weight: 11.7 mg (Approximately)
• Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Maximum for 10 Seconds
• MSL 1
Typical Applications
• Switching Power Supplies including Compact Adapters and Flat
Panel Display
• High Frequency and DC−DC Converters
• Freewheeling and OR−ing diodes
• Reverse Battery Protection
• Instrumentation
• Automotive LED Lighting
This document contains information on a product under development. ON Semiconductor
reserves the right to change or discontinue this product without notice.
http://onsemi.com
TRENCH SCHOTTKY
RECTIFIER
2.0 AMPERES
45 VOLTS
SOD−123FL
CASE 498
PLASTIC
POWERMITE
CASE 457
PLASTIC
MARKING DIAGRAMS
T42MG
G
1
M
T42G
2
T42 = Specific Device Code
M = Date Code
G = Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device
NTS245ESFT3G
Package
SOD−123
(Pb−Free)
Shipping†
10,000/
Tape & Reel
NRVTS245ESFT3G
SOD−123
10,000/
(Pb−Free) Tape & Reel
NTSM245ESFT3G
POWERMITE 12,000/
(Pb−Free) Tape & Reel
NRVTSM245ESFT3G POWERMITE 12,000/
(Pb−Free) Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2014
July, 2014 − Rev. P0
1
Publication Order Number:
NTS245ESF/D
1 page  
NTS245ESF, NRVTS245ESF, NTSM245ESF, NRVTSM245ESF
PACKAGE DIMENSIONS
POWERMITE
CASE 457−04
ISSUE F
−A−
S
C
J
F
0.08 (0.003) M T B S C S
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSIONS A AND B DO NOT INCLUDE MOLD
FLASH, PROTRUSIONS OR GATE BURRS. MOLD
FLASH, PROTRUSIONS OR GATE BURRS SHALL
NOT EXCEED 0.15 (0.006) PER SIDE.
−B−
K
R
J
L
PIN 1
PIN 2
MILLIMETERS
INCHES
DIM MIN MAX MIN MAX
A 1.75 2.05 0.069 0.081
B 1.75 2.18 0.069 0.086
C 0.85 1.15 0.033 0.045
D 0.40 0.69 0.016 0.027
F 0.70 1.00 0.028 0.039
H -0.05 +0.10 -0.002 +0.004
J 0.10 0.25 0.004 0.010
K 3.60 3.90 0.142 0.154
L 0.50 0.80 0.020 0.031
R 1.20 1.50 0.047 0.059
S 0.50 REF
0.019 REF
HD
−T− 0.08 (0.003) M T B S C S
STYLE 1:
PIN 1. CATHODE
2. ANODE
STYLE 2:
PIN 1. ANODE OR CATHODE
2. CATHODE OR ANODE
(BI−DIRECTIONAL)
STYLE 3:
PIN 1. ANODE
2. CATHODE
SOLDERING FOOTPRINT*
2.67
0.105
0.635
0.025
0.762
0.030
2.54
0.100
1.27
0.050
ǒ ǓSCALE 10:1
mm
inches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and the
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries.
SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed
at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation
or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets
and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended,
or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which
the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or
unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable
copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
http://onsemi.com
5
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NTS245ESF/D
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet NRVTS245ESF.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NRVTS245ESF | Very Low Forward Voltage Trench-based Schottky Rectifier | ON Semiconductor |
| NRVTS245ESF | Very Low Forward Voltage Trench-based Schottky Rectifier | ON Semiconductor |
| NRVTS245ESFT1G | Very Low Forward Voltage Trench-based Schottky Rectifier | ON Semiconductor |
| NRVTS245ESFT3G | Very Low Forward Voltage Trench-based Schottky Rectifier | ON Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |