|
|
Número de pieza | HMC1162 | |
Descripción | 9.25GHz to 10.10GHz MMIC VCO | |
Fabricantes | Analog Devices | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HMC1162 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
No Preview Available ! Data Sheet
9.25 GHz to 10.10 GHz MMIC VCO with Half
Frequency Output
HMC1162
FEATURES
Dual output
fOUT = 9.25 GHz to 10.10 GHz
fOUT/2 = 4.625 GHz to 5.050 GHz
Power output (POUT): 11 dBm (typical)
Single-sideband (SSB) phase noise: −115 dBc/Hz at 100 kHz
No external resonator needed
RoHS-compliant, 5 mm × 5 mm LFCSP: 25 mm²
APPLICATIONS
Point to point and multipoint radios
Test equipment and industrial controls
Very small aperture terminals (VSATs)
GENERAL DESCRIPTION
The HMC1162 is a monolithic microwave integrated circuit
(MMIC), voltage controlled oscillator (VCO) that integrates the
resonator, a negative resistance device, and varactor diodes, and
features a half frequency output.
Because of the monolithic construction of the oscillator, the
output power and phase noise performance are excellent over
temperature.
FUNCTIONAL BLOCK DIAGRAM
32 31 30 29 28 27 26 25
NC 1
NC 2
NC 3
NC 4
GND 5
NC 6
NC 7
NC 8
24 NC
23 NC
22 NC
21 VCC
20 NC
19 RFOUT
18 NC
17 NC
9 10 11 12 13 14 15 16
PACKAGE
BASE
GND
NOTES
1. NC = NO CONNECT. THESE PINS ARE NOT INTERNALLY
CONNECTED. HOWEVER, THESE PINS CAN BE CONNECTED
TO RF/DC GROUND WITHOUT AFFECTING THE PERFORMANCE
OF THE DEVICE.
Figure 1.
The power output is 11 dBm typical from a 5 V supply voltage.
The VCO is housed in a RoHS-compliant, 32-lead LFCSP and
requires no external matching components.
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevices for itsuse,nor foranyinfringementsofpatentsor other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
©2015 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
1 page Data Sheet
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
HMC1162
32 31 30 29 28 27 26 25
NC 1
NC 2
NC 3
NC 4
GND 5
NC 6
NC 7
NC 8
HMC1162LP5E
TOP VIEW
(Not to Scale)
24 NC
23 NC
22 NC
21 VCC
20 NC
19 RFOUT
18 NC
17 NC
9 10 11 12 13 14 15 16
NOTES
1. NC = NO CONNECT. THESE PINS ARE NOT INTERNALLY
CONNECTED. HOWEVER, THESE PINS CAN BE CONNECTED
TO RF/DC GROUND WITHOUT AFFECTING THE PERFORMANCE
OF THE DEVICE.
2. THE PACKAGE BOTTOM HAS AN EXPOSED METAL PAD THAT
MUST BE CONNECTED TO RF/DC GROUND.
Figure 2. Pin Configuration
Table 3. Pin Function Descriptions
Pin No.
Mnemonic
1 to 4, 6 to 10, 13 to 18, 20, 22 to
28, 30 to 32
NC
5, 11 GND
12 RFOUT/2
19 RFOUT
21 VCC
29 VTUNE
EP
Description
No Connect. These pins are not internally connected. However, these pins can be
connected to RF/dc ground without affecting the performance of the device.
Ground. These pins must be connected to RF/dc ground.
Half Frequency Output. This pin is ac-coupled.
RF Output. This pin is ac-coupled.
Supply Voltage (5 V).
Control Voltage and Modulation Input. The modulation bandwidth is dependent on the
drive source impedance.
Exposed Pad. The package bottom has an exposed metal pad that must be connected
to RF/dc ground.
Rev. A | Page 5 of 11
5 Page Data Sheet
PACKAGING AND ORDERING INFORMATION
OUTLINE DIMENSIONS
PIN 1
INDICATOR
5.10
5.00 SQ
4.90
0.50
BSC
0.30
0.25
0.18
25
24
32
1
EXPOSED
PAD
PIN 1
INDICATOR
3.80
3.65 SQ
3.50
1.00
0.90
0.80
SEATING
PLANE
TOP VIEW
0.45
0.40
0.35
17 8
16 9
BOTTOM VIEW
3.50 REF
0.20 MIN
0.05 MAX
0.02 NOM
COPLANARITY
0.08
0.20 REF
FOR PROPER CONNECTION OF
THE EXPOSED PAD, REFER TO
THE PIN CONFIGURATION AND
FUNCTION DESCRIPTIONS
SECTION OF THIS DATA SHEET.
HMC1162
COMPLIANT TO JEDEC STANDARDS MO-220-VHHD-4.
Figure 18. 32-Lead Lead Frame Chip Scale Package [LFCSP_VQ]
5 mm × 5 mm Body, Very Thin Quad
(HCP-32-1)
Dimensions shown in millimeters
ORDERING GUIDE
Model1
Temperature Range
HMC1162LP5E
−40°C to +85°C
MSL Rating2
MSL3
Package Description
32-Lead LFCSP_VQ
HMC1162LP5ETR −40°C to +85°C
MSL3
32-Lead LFCSP_VQ, 7”Tape and Reel
EV1HMC1162LP5
1 The HMC1162LP5E and HMC1162LP5ETR are RoHS compliant parts.
2 See the Absolute Maximum Ratings section, Table 2.
3 XXXX is a placeholder for the 4-digit lot number.
Evaluation Board
Package Option
HCP-32-1
HCP-32-1
Qty. Brand3
H1162
XXXX
500 H1162
XXXX
©2015 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D13066-0-9/15(A)
Rev. A | Page 11 of 11
www.analog.com/HMC1162
11 Page |
Páginas | Total 11 Páginas | |
PDF Descargar | [ Datasheet HMC1162.PDF ] |
Número de pieza | Descripción | Fabricantes |
HMC1160 | MMIC VCO | Analog Devices |
HMC1161 | 8.71 GHz to 9.55 GHz MMIC VCO | Analog Devices |
HMC1162 | 9.25GHz to 10.10GHz MMIC VCO | Analog Devices |
HMC1163 | 9.65 GHz to 10.41 GHz MMIC VCO | Analog Devices |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |