|
|
Número de pieza | CPC7593 | |
Descripción | Line Card Access Switch | |
Fabricantes | Clare | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de CPC7593 (archivo pdf) en la parte inferior de esta página. Total 24 Páginas | ||
No Preview Available ! CPC7593
Line Card Access Switch
Features
• TTL logic level inputs for 3.3V logic interfaces
• Smart logic for power up / hot plug state control
• Improved switch dv/dt immunity of 500 V/μs
• Small 20-pin or 28-pin SOIC or 28-pin DFN package
• DFN version provides 65% PCB area reduction over
4th generation EMRs
• Monolithic IC reliability
• Low, matched, RON
• Eliminates the need for zero-cross switching
• Flexible switch timing for transition from ringing
mode to talk mode.
• Clean, bounce-free switching
• SLIC tertiary protection via integrated current
limiting, voltage clamping and thermal shutdown
• 5 V operation with power consumption < 10.5 mW
• Intelligent battery monitor
• Logic-level inputs, no external drive circuitry required
Applications
• Standard voice linecards
• Integrated Voice and Data (IVD) linecards
• Central office (CO)
• Digital Loop Carrier (DLC)
• PBX Systems
• Digitally Added Main Line (DAML)
• Hybrid Fiber Coax (HFC)
• Fiber in the Loop (FITL)
• Pair Gain System
• Channel Banks
Description
The CPC7593 is a member of Clare’s next generation
Line Card Access Switch (LCAS) family. This
monolithic 10-pole line card access switch is available
in a 20 or 28 pin SOIC or a 28 pin DFN package. It
provides the necessary functions to replace three
2-Form-C electromechanical relays on analog line
cards or combined voice and data line cards found in
central office, access, and PBX equipment. The
device contains solid state switches for tip and ring line
break, ringing injection and test access. The CPC7593
requires only a +5 V supply and provides stable start
up conditioning during system power up and for hot
plug insertion applications. Once active, the inputs
respond to traditional TTL logic levels enabling the
CPC7593 to be used with 3.3V only logic.
Ordering Information
CPC7593 part numbers are specified as shown here:
B - 28-pin SOIC delivered 29/Tube, 1000/Reel
M - 28-pin DFN delivered 33/Tube, 1000/Reel
Z - 20-pin SOIC delivered 40/Tube, 1000/Reel
CPC7593 x x xx
TR - Add for Tape & Reel Version
A - With Protection SCR
B - Without Protection SCR
C - With Protection SCR and with Extra Logic State
D - Without Protection SCR and with Extra Logic State
Figure 1. CPC7593 Block Diagram
Pb
RoHS
2002/95/EC
e3
T (T )TESTin
CHANTEST
Tip
Ring
T (T )TESTout
DROPTEST
T 7LINE
Secondary
Protection
RLINE 22
10 8 TRINGING
SW7
X
X SW5 X SW3
X
SW1
5
X SW9
SW2
X
X SW6 XSW4
X SW10
X
SW8
CPC7593
SCR
Trip
Circuit
+5 Vdc
12 VDD
6 TBAT
SLIC
23 RBAT
17
VREF
Switch
Control
L
A
T
16
15
Logic
C
H 18
INTESTin
INRINGING
INTESTout
LATCH
R (R )TESTout
DROPTEST
R (R )TESTin CHANTEST
19
20 RRINGING
24
300Ω (min.)
1
FGND
28
VBAT
14 13
DGND
TSD
VBAT
RINGING
NOTE 1: Pin assignments are for the 28 pin package.
NOTE 2: Block diagram shown with the optional protection SCR.
DS-CPC7593 - R04
www.clare.com
1
1 page 1.6 Switch Specifications
1.6.1 Break Switches, SW1 and SW2
Parameter
Off-State
Leakage Current
On Resistance
On Resistance
Matching
DC current limit
Dynamic current limit
(t ≤ 0.5 μs)
Logic input to switch
output isolation
dv/dt sensitivity
Test Conditions
VSW1 (differential) = TLINE to TBAT
VSW2 (differential) = RLINE to RBAT
All-Off state.
+25° C,
VSW (differential) = -320 V to gnd
VSW (differential) = +260 V to -60 V
+85° C,
VSW (differential) = -330 V to gnd
VSW (differential) = +270 V to -60 V
-40° C,
VSW (differential) = -310 V to gnd
VSW (differential) = +250 V to -60 V
ISW(on) = ±10 mA, ±40 mA,
RBAT and TBAT = -2 V
+25° C
+85° C
-40° C
Per SW1 & SW2 On Resistance test
conditions.
VSW (on) = ±10 V
+25° C
+85° C
-40° C
Break switches on, all other switches
off. Apply ±1 kV 10x1000 μs pulse with
appropriate protection in place.
Logic inputs = GND
+25° C, VSW (TLINE, RLINE) = ±320 V
+85° C, VSW (TLINE, RLINE) = ±330 V
-40° C, VSW (TLINE, RLINE) = ±310 V
100VPP Square Wave, 100Hz
(Not production tested - limits are
guaranteed by design and quality
control sampling audits.)
Symbol
ISW
RON
ΔRON
ISW
ISW
ISW
-
Minimum
-
-
-
-
80
-
-
-
-
-
-
Typical
0.1
0.3
0.1
14.5
20.5
10.5
0.15
225
150
400
2.5
0.1
0.3
0.1
500
CPC7593
Maximum
Unit
1 μA
-
28 Ω
-
0.8 Ω
-
mA
425
-A
1 μA
- V/μs
R04 www.clare.com
5
5 Page 1.6.7 TESTin Switches, SW9 and SW10
Parameter
Test Conditions
VSW9 (differential) = TTESTin to TBAT
VSW10 (differential) = RTESTin to RBAT
All-Off state.
+25° C,
VSW (differential) = -320 V to gnd
Off-state leakage current VSW (differential) = +260 V to -60 V
+85° C,
VSW (differential) = -330 V to gnd
VSW (differential) =+270 V to -60 V
-40° C,
VSW (differential) = -310 V to gnd
VSW (differential) = +250 V to -60 V
ISW (on) = ±10 mA
On Resistance
+25° C
+85° C
-40° C
DC current limit
VSW (on) = ±10 V
+25° C
+85° C
-40° C
Logic input to switch
output isolation
dv/dt sensitivity
Logic inputs = GND
+25°C, VSW (TTESTin, RTESTin)=±320V
+85°C, VSW (TTESTin, RTESTin)=±330V
-40°C, VSW (TTESTin, RTESTin)=±310V
100VPP Square Wave, 100Hz
(Not production tested - limits are
guaranteed by design and quality
control sampling audits.)
Symbol
ISW
RON
ISW
ISW
-
Minimum
-
-
-
80
-
-
Typical
0.1
0.3
0.1
35
50
26
160
110
210
0.1
0.3
0.1
500
CPC7593
Maximum
Unit
1 μA
-
70 Ω
-
-
- mA
250
1 μA
- V/μs
R04 www.clare.com
11
11 Page |
Páginas | Total 24 Páginas | |
PDF Descargar | [ Datasheet CPC7593.PDF ] |
Número de pieza | Descripción | Fabricantes |
CPC7591 | Line Card Access Switch | Clare |
CPC7591 | Line Card Access Switch | IXYS |
CPC7592 | Line Card Access Switch | IXYS |
CPC7592BA | Line Card Access Switch | IXYS |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |