|
|
Número de pieza | CXP81124 | |
Descripción | CMOS 8-bit Single Chip Microcomputer | |
Fabricantes | Sony Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de CXP81124 (archivo pdf) en la parte inferior de esta página. Total 27 Páginas | ||
No Preview Available ! CXP81120/81124
CMOS 8-bit Single Chip Microcomputer
Description
The CXP81120/81124 is a CMOS 8-bit micro-
computer which consists of A/D converter, serial
interface, timer/counter, time base timer, PWM
output, as well as basic configurations like 8-bit
CPU, ROM, RAM and I/O port. They are integrated
into a single chip.
Also the CXP81120/81124 provides power-on reset
function, sleep/stop function which enables to lower
power consumption.
64 pin QFP (Plastic)
64 pin LQFP (Plastic)
Features
• A wide instruction set (213 instructions) which covers various types of data
— 16-bit operation/multiplication and division/Boolean bit operation instructions
• Minimum instruction cycle
250ns at 16MHz operation (4.5 to 5.5V)
333ns at 12MHz operation (3.0 to 5.5V)
• Incorporated ROM capacity 20K bytes (CXP81120)
24K bytes (CXP81124)
• Incorporated RAM capacity 832 bytes
• Peripheral functions
— A/D converter
8-bit, 8-channel, successive approximation system
(Conversion time: 20µs at 16MHz)
— Serial interface
Incorporated buffer RAM (1 to 32 bytes auto transfer), 1 channel
Incorporated 8-bit and 8-stage FIFO
(1 to 8 bytes auto transfer), 1 channel
— Timer
8-bit timer, 8-bit timer/counter, 19-bit time base timer
— PWM output
12 bits, 2 channels
• Interruption
10 factors, 10 vectors, multi-interruption possible
• Standby mode
Sleep/stop
• Package
64-pin plastic QFP/LQFP
• Piggyback/evaluator
CXP81100 64-pin ceramic PQFP
Structure
Silicon gate CMOS IC
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E94414A69-PS
1 page CXP81120/81124
Pin Description
Symbol
I/O
Description
PA0 to PA7 Output
(Port A)
8-bit output port.
(8 pins)
PB0 to PB7 Output
(Port B)
8-bit output port.
(8 pins)
PC0 to PC7 I/O
(Port C)
8-bit I/O port. I/O can be set in a unit of single bits.
(8 pins)
PD0 to PD7 I/O
(Port D)
8-bit I/O port. I/O and function as standby release input can be set in a unit of
single bits.
(8 pins)
PE0/INT0
PE1/EC/INT2
PE2/PWM0
PE3/PWM1
Input/Input
Input/Input/
Input
Output/Output
(Port E)
4-bit port. Lower 2 bits
are for input; upper 2 bits
are for output.
(4 pins)
Output/Output
Input to request external interruption.
Active at the falling edge. (2 pins)
External event
input for
timer/counter.
12-bit PWM output. (2 pins)
PF0/AN0
to
PF3/AN3
PF4/AN4
to
PF7/AN7
Input/Input
Output/Input
(Port F)
8-bit port. Lower 4 bits are for input; upper
4 bits are for output.
Lower 4 bits also serve as standby release
input.
(8 pins)
Analog input to A/D
converter.
(8 pins)
SCK0
I/O
Serial clock (CH0) I/O.
SO0
Output
Serial data (CH0) output.
SI0
Input
Serial data (CH0) input.
CS0
Input
Serial interface (CH0) chip select input.
PG3/TO
PG4
PG5/SCK1
PG6/SO1
PG7/SI1/INT1
Output/Output
Output
I/O/I/O
I/O/Output
I/O/Input
Input
(Port G)
5-bit port. Lower 2 bits
are for output; upper
3 bits are for I/O.
I/O can be set in a unit
of single bits.
(5 pins)
Timer/counter rectangular wave output.
Serial clock (CH1) I/O.
Serial data (CH1) output.
Serial data (CH1)
input.
Input to request external
interruption. Active at the
falling edge.
EXTAL
XTAL
Input
Output
Connects a crystal oscillator for system clock. When supplying the external
clock, input the external clock to EXTAL pin and input opposite phase
clock to XTAL pin.
RST
I/O
System reset; active at Low level. RST pin is I/O pin, which outputs “Low”
level by incorporated power-on reset function when power turns on.
(Mask option)
–5–
5 Page CXP81120/81124
Absolute Maximum Ratings
(Vss = 0V reference)
Item
Symbol
Rating
Unit
Remarks
VDD
–0.3 to +7.0
V
Supply voltage
AVDD
AVSS
AVSS to +7.0
–0.3 to +0.3
V
V
Input voltage
Output voltage
AVREF
VIN
VOUT
AVSS to +7.0
–0.3 to +7.0∗1
–0.3 to +7.0∗1
V
V
V
High level output current
IOH
–5 mA
High level total output current
∑IOH
–50 mA Total of output pins
Low level output current
IOL
15 mA
Low level total output current
∑IOL
130 mA Total of output pins
Operating temperature
Topr
–20 to +75
°C
Storage temperature
Tstg
–55 to +150
°C
Allowable power dissipation
PD
600 mW QFP-64P-L01
380 mW LQFP-64P-L01
∗1 VIN and VOUT should not exceed VDD + 0.3V. (CS0 and SI0 excluded.)
Note) Usage exceeding absolute maximum ratings may permanently impair the LSI. Normal operation should
be conducted under the recommended operating conditions. Exceeding those conditions may adversely
affect the reliability of the LSI.
– 11 –
11 Page |
Páginas | Total 27 Páginas | |
PDF Descargar | [ Datasheet CXP81124.PDF ] |
Número de pieza | Descripción | Fabricantes |
CXP81120 | CMOS 8-bit Single Chip Microcomputer | Sony Corporation |
CXP81124 | CMOS 8-bit Single Chip Microcomputer | Sony Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |