|
|
PDF AN5693K Data sheet ( Hoja de datos )
| Número de pieza | AN5693K | |
| Descripción | Luminance/Chroma and Sync. Signals Processing ICwith Built-in I2Cbus Interfacefor PAL/NTSC Color-TV | |
| Fabricantes | Panasonic Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AN5693K (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
ICs for TV
AN5693K
Luminance,Chroma and Sync. Signals Processing IC(with Built-in I2C-
bus Interface)for PAL/NTSC Color-TV
s Overview
The AN5693K is an IC that processes PAL-and NTSC-
compatible video,chroma,RGB and sync. signals.
s Features
• Built-in I2C-bus control interface.
• SECAM-compatible together with the AN5637 SECAM
signal processing IC.
s Applications
• TV(Multi-system compatible)
Unit : mm
1 52
26 27
13.7±0.3
3 to 15˚
(15.24)
3 to 15˚
(0.7)
3.85±0.3
(3.3)
SDIP052-P-0600A
1
1 page  
ICs for TV
s Recommended Operating Range
Parameter
Symbol
Range
Operating supply circuit current
I39
I15
I16
I17
I28
I29
I33
I34
I44
I46
I47
10 to 25
− 6.0 to + 0.6
− 6.0 to + 0.6
− 6.0 to + 0.6
− 0.3 to + 0.1
− 2.4 to + 0.8
− 0.8 to + 0.1
− 0.8 to + 0.1
− 6.4 to + 0.1
− 0.8 to + 0.1
− 0.3 to + 0.1
Note) Do not apply voltage or current externally to any pin not listed in this table.
As for circuit current,(+)is the current flowing into the IC and(−)is the current flowing out of the IC.
AN5693K
Unit
mA
s Electrical Characteristics at Ta = 25 °C
Parameter
Symbol
Conditions
Min Typ Max Unit
Power supply DAC data is standard.
Supply current 1
Supply current 2
Steady state supply voltage
I14 Current when V14 = 9 V
I35 Current when V35 = 5 V
V39 When Pin39 current
I = 15 mA,Pin39 voltage
38 48 58 mA
48 60 72 mA
5.8 6.5 7.2 V
Steady state supply Current
Steady state supply input
resistance
I39 Current when V39 = 5 V
R39 DC measurement input resistance when
I39 = 10 mA ∼ 25 mA
2
1
5 7 mA
5 10 Ω
Interface
Video adjust gain
VPO
DC
measurement
20
log
output(0A
output(0A
=
=
F8)
08)
5
6
7
dB
Video adjust output resistance RO29 DC measurement
External DAC 1 DC voltage VEXT1max Pin24 DC voltage when DAC 0C = 00
(max.)
DC measurement
70 120 170
3.10 3.40 3.70
Ω
V
External DAC 1 DC voltage VEXT1min Pin24 DC voltage when DAC 0C = 7F
(min.)
DC measurement
2.10 2.40 2.70
V
External DAC 2 DC voltage VEXT2max Pin25 DC voltage DAC 0B = 00,04D7 = 0 7.8 8.1 8.7
(max.)
DC measurement
V
External DAC 2 DC voltage VEXT2min Pin25 DC voltage DAC 0B = FF,04D7 = 1 0.1 0.8 1.0
(min.)
DC measurement
V
5
5 Page 
ICs for TV
AN5693K
s Electrical Characteristics at Ta = 25 °C (continued)
• Reference data for design (continued)
Note) The characteristic values below are theoretical values for designing and not guaranteed.
Parameter
Symbol
Conditions
Min
Typ
Video signal processing (VWB = 0.42 VOP)Input 0.6 VPP stair step. Measure at G-out(continued)
Y input dynamic range
VImax Contrast DAC 03 = 40
Measure at video input Pin31
1.0 1.7
Y S/N ratio
Black level expansion start
point
SNY
VBLS
Trap on/off gain difference ∆GTRAP
Trap on/off delay time variation ∆tTRAP
Trap frequency tolerance
∆fTRAP
Contrast DAC 03 = 7 F
Start point when
V36 = 4.5 V
Trap on/off ratio
Trap on/off
When chroma input is 4.43 MHz, trap centre
frequency from 4.43 M
51
37
−1
480
−70
56
42
0
530
0
Trap attenuation 4.43 MHz ATTTRAPP When chroma input is 4.43 MHz, 4.43 MHz 26
component attenuation
30
Trap attenuation 3.58 MHz ATTTRAPN When chroma input is 3.58 MHz, 3.58 MHz 26
component attenuation
30
Trap automatic adjustment
range
fTRAP VCO frequency of ∆fTRAP ≤ 70 kHz
3
Trap set frequency
Video signal output VCC
variation
fST
∆VY/V
DAC 0 E−D6 = 1
Trap's frequency
VCC1 = 9 V (± 10 %)
4.7 5.5
0 100
Video signal output temperature ∆VY/T Ta = −20 °C to +70 °C
variation
05
PAL/NTSC delay time
difference
∆tP/N Trap on(NTSC-PAL)
−10 10
Color signal processing All tests on : Burst 300 mVPP(PAL)standard is B-out
Demodulation output residue VCAR1 Pin48,49 output's 2nd harmonics
carrier
0
Color difference output residue VCAR2 Pin15,16,17 output's 2nd harmonics
carrier
0
VCO free run frequency
(PAL)
fCP Compare with standard
f = 4.433619 MHz
−300 0
VCO free run frequency
(NTSC)
fCN Compare with standard
f = 3.579545 MHz
−300 0
VCO VCC variation
Phase hold characteristic
(PAL)
∆fC VCC1 = 9 V (± 10 %)
VCC VCC3 = 5 V (± 10 %)
∆θP Tint change when
∆fC = −300 Hz to +300 Hz
−300 0
02
Max Unit
VPP
dB
47 IRE
+1 dB
580 ns
+70 kHz
dB
dB
5 MHz
6.3 MHz
200 mV/V
10 %
30 ns
30 mV
50 mV
+300 Hz
+300 Hz
+300 Hz
5 deg
100 Hz
11
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet AN5693K.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AN5693 | Luminance/Chroma and Sync. Signals Processing ICwith Built-in I2Cbus Interfacefor PAL/NTSC Color-TV | Panasonic Semiconductor |
| AN5693K | Luminance/Chroma and Sync. Signals Processing ICwith Built-in I2Cbus Interfacefor PAL/NTSC Color-TV | Panasonic Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |