|
|
Datasheet LM4862 Equivalent ( PDF ) |
N.º | Número de pieza | Descripción | Fabricantes | Category |
1 | LM4862 | LM4862 675 mW Audio Power Amplifier with Shutdown Mode (Rev. F) | Texas Instruments | amplifier |
2 | LM4862 | 675 mW Audio Power Amplifier with Shutdown Mode LM4862 675 mW Audio Power Amplifier with Shutdown Mode
May 1997
LM4862 675 mW Audio Power Amplifier with Shutdown Mode
General Description
The LM4862 is a bridge-connected audio power amplifier capable of delivering typically 675 mW of continuous average power to an 8Ω load with 1% (THD) from a | National Semiconductor | amplifier |
3 | LM4862 | AUDIO POWER AMPLIFIER UNISONIC TECHNOLOGIES CO., LTD LM4862
Preliminary CMOS IC
AUDIO POWER AMPLIFIER WITH SHUTDOWN MODE
DESCRIPTION
DIP-8
The UTC LM4862 is a built in bridge-connected form audio amplifier. In normal operation, it can deliver 500 mW (typ.) continuous power. The output load of the UTC LM4862 should b | Unisonic Technologies | amplifier |
4 | LM4862M | 675 mW Audio Power Amplifier with Shutdown Mode LM4862 675 mW Audio Power Amplifier with Shutdown Mode
May 1997
LM4862 675 mW Audio Power Amplifier with Shutdown Mode
General Description
The LM4862 is a bridge-connected audio power amplifier capable of delivering typically 675 mW of continuous average power to an 8Ω load with 1% (THD) from a | National Semiconductor | amplifier |
5 | LM4862N | 675 mW Audio Power Amplifier with Shutdown Mode LM4862 675 mW Audio Power Amplifier with Shutdown Mode
May 1997
LM4862 675 mW Audio Power Amplifier with Shutdown Mode
General Description
The LM4862 is a bridge-connected audio power amplifier capable of delivering typically 675 mW of continuous average power to an 8Ω load with 1% (THD) from a | National Semiconductor | amplifier |
LM4 Datasheet ( Hoja de datos ) - resultados coincidentes |
N.º | Número de pieza | Descripción | Fabricantes | Catagory |
1 | LM40 | Diode (spec sheet) American Microsemiconductor diode | | |
2 | LM40 | Hardware Monitor with Dual Thermal Diodes and SensorPath Bus LM40 Hardware Monitor with Dual Thermal Diodes and SensorPath™ Bus
May 2004
LM40 Hardware Monitor with Dual Thermal Diodes and SensorPath™ Bus
General Description
The LM40 is a hardware monitor that measures 3 temperature zones, 5 voltages and has a single-wire interface compatible with Nation National Semiconductor diode | | |
3 | LM40044A | 4.00 inch 4x4 Dot Matrix LED Display LIGHTKEY led | | |
4 | LM4024-11EWRN | 0.4 Four Digital Display FOUR DIGIT DISPLAY
0.4” FOUR DIGIT DISPLAY Electrical/Optical Characteristics at TA=25℃ & IF=20mA
PART NUMBER COMMON ANODE (COMMON CATHODE) LN(M)4024-11EWRN LN(M)4034-11EWRN LN(M)4044-11EWRN LN(M)4044R-11RRRN LN(M)4074-11-M1EWRN LN(M)4054-11EWRN CHIP COLOR GREEN YELLOW ORANGE ORANGE RED RED λp Ledtech Electronics data | | |
5 | LM4030 | LM4030 SOT-23 Ultra-High Precision Shunt Voltage Reference (Rev. B) Texas Instruments data | | |
6 | LM4034-11EWRN | 0.4 Four Digital Display FOUR DIGIT DISPLAY
0.4” FOUR DIGIT DISPLAY Electrical/Optical Characteristics at TA=25℃ & IF=20mA
PART NUMBER COMMON ANODE (COMMON CATHODE) LN(M)4024-11EWRN LN(M)4034-11EWRN LN(M)4044-11EWRN LN(M)4044R-11RRRN LN(M)4074-11-M1EWRN LN(M)4054-11EWRN CHIP COLOR GREEN YELLOW ORANGE ORANGE RED RED λp Ledtech Electronics data | | |
7 | LM4040 | PRECISION MICROPOWER SHUNT VOLTAGE REFERENCES LM4040
PRECISION MICROPOWER SHUNT VOLTAGE REFERENCES
Description
The LM4040 is a family of bandgap circuits designed to achieve precision micro-power voltage references of 2.5V, 3.0V and 5.0V. The devices are available in 0.2% B-grade, 0.5% C-grade and 1% Dgrade initial tolerances.
Pin Assignments Diodes data | |
Esta página es del resultado de búsqueda del LM4862. Si pulsa el resultado de búsqueda de LM4862 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
Número de pieza | Descripción | Fabricantes | |
SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
Sanken |
DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |