DataSheet26.com

ENH050Q1-600 PDF даташит

Спецификация ENH050Q1-600 изготовлена ​​​​«WEDC» и имеет функцию, называемую «(ENH050Q1-xxx) Color TFT-LCD Module Features GENERAL DESCRIPTION».

Детали детали

Номер произв ENH050Q1-600
Описание (ENH050Q1-xxx) Color TFT-LCD Module Features GENERAL DESCRIPTION
Производители WEDC
логотип WEDC логотип 

21 Pages
scroll

No Preview Available !

ENH050Q1-600 Даташит, Описание, Даташиты
www.DataSheet4U.com
White Electronic Designs
Display Systems Division
ENH050Q1-320/450/600
ENH050Q1-320/450/600 Color TFT-LCD Module Features
GENERAL DESCRIPTION
Slim, lightweight and compact
Panelview provides optically enhanced solutions to the
standard Sharp LQ5AW136 color active matrix LCD
module. The first enhancement is an index matching
(IM) film lamination to the front surface of the display
polarizer.
The IM film is available in two surface treatments - IM/Clear
and IM/110 (a 10% diffusion).The second enhancement is
the incorporation of a reflective polarizer (RP) to improve
brightness by up to 40%. The third enhancement is
the addition of prism films (RPp) further increasing the
brightness of the display. The module accepts full color
video signals conforming to the NTSC(M) and PAL(G-B)
system standards.
It can withstand an intense environment, the online
dimension is suitable for an automotive display, compact
size, compatible with 2DIN size.
Panelview assumes no responsibility for any damage
resulting from the use of the device which does not
comply with the instructions and the precautions specified
in these specification sheets. Panelview does assume the
responsibility for the warranty of the enhanced product.
FEATURES
Dual mode type. [NTSC(M) and PAL(B-G)
standards]
1. Active area/Outline area=70%
2. Thickness: 16.5mm
3. Mass: 185g (Max)
Built-in video interface circuit and control circuit
responsive to two sets of standard RGB analog
video signals.
Reduced refleciton as a resuld of low reflectance
Black-Matrix and Index Matching (IM) film
lamination. IM is available in two surface
treatments, IM/Clear (glossy) and IM/110 (10%
diffusion).
It is possible to use both the simultaneous and the
independent time sampling.
An external clock mode is available.
Optical viewing angle: wide view angle (6 o'clock
direction.) (Customer can use this module as a 12
o'clock viewing direction type by using a display
rotating function to rotate right/left and up/down
scanning direction electrically.)
This module includes a high luminance edge light
that is excellent at low temperature.
It is possible to use the dimming frequency (PWM)
for backlight.
MBK-PAL enables the 234-scanning lines panel to
CONSTRUCTION AND OUTLINE
display a picture with virtually 273-scanning lines.
TFT-active matrix-LCD drive system with high
contrast.
Outline dimensions of TFT-LCD module: See Fig. 3
The module consists of a TFT-LCD panel, driver
IC's control PWB mounted with electronic circuits,
74,800 pixels (RBG Stripe configurations and full
edge light, frame, front and rear shielding cases.
color) 5" diagonal size.
(Backlight driving DC/AC inverter is not built in the
module.)
MECHANICAL SPECIFICATIONS
Parameter
Display Format
Active Area
Screen Size (Diagonal)
Dot Pitch
Dot Configuration
Outline Dimension (1)
Mass
Specifications
74,800
960 (W) x RGB x 234 (H)
102.2 (W) x 74.8 (H)
13 (5")
0.1065 (W) x 0.3195 (H)
RGB Stripe configuration
126.8 (W) x 89.6 (H) x 16.5 (D)
185 (Max)
Units
pixels
dots
mm
cm
mm
-
mm
g
Note: This measurement is typical, and see Fig. 3 for details.
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
Original specifications created by Sharp.
August 2003
Rev. 0
1 Display Systems Division • Hillsboro, OR • (503) 690-2460 • www.wedc.com









No Preview Available !

ENH050Q1-600 Даташит, Описание, Даташиты
White Electronic Designs
Display Systems Division
ENH050Q1-320/450/600
INPUT TERMINALS AND THEIR DESCRIPTIONS
TTL-LCD Panel Driving Section
(Hi means digital input voltage, Lo means GND.)
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Symbol
HSY
VSY
PWM
NTP
HRV
VRV
VSW
SAM
VCDC
VSH
VBS
BRT
VR1
VG1
I/O Description
Remarks
I, O Input/Output horizontal sync. signal (low active)
(1)
I, O Input/Output vertical sync. signal (low active)
(2)
O Terminal for output PWM of dimming back light
(3)
I Terminal for display mode change of NTSC and PAL
(4)
I Turning the direction of horizontal scanning
(5)
I Turning the direction of vertical scanning
(6)
I Selection signal of two sets of video signals
(7)
I Terminal for sampling mode change
(8)
I DC bias voltage adjusting terminal of common electrode driving signal
(9)
I Positive power supply voltage
I Composite video signal of sync. seperator
(10)
I Brightness adjusting terminal
(11)
I Color video signal (Red) 1
Positive
(On when VSW=Hi.)
I Color video signal (Green) 1
15 VB1
I Color video signal (Blue) 1
16 VSL
17 VR2
18 VG2
I Negative power supply voltage
I Color video signal (Red) 2
I Color video signal (Green) 2
Positive
(On when VSW=Lo.)
19 VB2
I Color video signal (Blue) 2
20 GND
I Ground
21 CKC
I Change the input/output direction of CK, HSY and VSY.
(12)
22 CK I, O Input/Output clock signal
(13)
Note:
1. If CKC='Hi', this terminal outputs horizontal sync. signal in phase with VBS.
If CKC='Lo', this terminal will be external horizontal sync. input terminal.
2. If CKC='Hi', this terminal outputs vertical sync. signal in phase with VBS.
If CKC='Lo', this terminal will be external vertical sync. input terminal.
3. PWM signal is used for the PWM dimming frequency and it is easy to get PWM signal dimming by combining both HSY and PWM signals. But use this PWM signal in case of
input standard NTSC or PAL signal.
4. This terminal is to switch the display mode, and it is NTSC mode when NTP is 'High' and is PAL mode when NTP is 'Low'.
5. When this terminal is 'High', it will be normal and when it is 'Low', it will display reversely on the horizontal direction.
6. When this terminal is 'High', it will be normal and when it is 'Low', it will display reversely on the vertical direction.
7. This terminal is to switch input for groups of RGB color video signals, and Input 1 (No. 13 to 15) is selected when VSW is 'High' and Input 2 (No. 17 to 19) is selected when VSW
is 'Low'.
8. This terminal switches to sampling mode. It is the independent data-sampling timing at RGB dot when SAM is 'High' and it is the simultaneous data-sampling timing at RGB dots
when SAM is 'Low'.
9. This terminal is applicable to the DC bias voltage adjusting terminal of the common electrode driving signal. If power supply voltage is typical, it is not necessary to re-adjust it.
So, Use it in the open condition. However, in the case that the power supply voltage is changed, or power supply voltage is reduced, adjust it externally to get the best contrast
with a resistor that is added to this terminal, or semi-fixed resistor, VCDC in module. A recommended circuit is shown in Fig. 5.
10. The sync. signal which will be input, is negative polarity and is applicable to standard composite sync. signal, negative one in the same pulse level.
11. DC voltage supplied to this terminal, makes the brightness of the screen adjustable, which is the black level of the video signal. Although this is adjusted in the time of delivery to
get the best display in the condition of the open terminal, it is also able to be re-adjusted externally with a resistor that can be added to this terminal, or a semi-fixed resistor, BRT,
in module. A recommended circuit is shown in Fig. 5.
12. CKC-'Hi', CK.HSY.VSY terminals are output mode. CKC='Lo': CK. HSY. VSY terminals are input mode.
13. If CKC='Hi', this terminal outputs the clock for sure drivers. If CKC='Lo', this terminal will be the external clock input terminal.
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
Original specifications created by Sharp.
August 2003
Rev. 0
2 Display Systems Division • Hillsboro, OR • (503) 690-2460 • www.wedc.com









No Preview Available !

ENH050Q1-600 Даташит, Описание, Даташиты
White Electronic Designs
Display Systems Division
ENH050Q1-320/450/600
Terminal
HSY
VSY
CK
FUNCTIONAL MACHINE AND INPUT/OUTPUT MODE
CKC="Hi"
SAM="Hi"
Output
Output
Output "Dot Clock"
SAM="Lo"
Output
Output
Output "Pixel Clock"
CKC="Lo"
SAM="Hi"
Input
Input
Input "Dot Clock"
SAM="Lo"
Input
Input
Input "Pixel Clock"
BACKLIGHT DRIVING SECTION
Terminal
CN1
No.
1
2
3
Symbol
VL1
NC
VL2
I/O Function
I Input terminal (Hi voltage side) [14]
- Non connection
I Input terminal (low voltage side)
Note:
14. Low Voltage side of DC/AC inverter for backlight driving connects with Ground of inverter circuit.
ABSOLUTE MAXIMUM RATINGS
GND = OV, tA = 25°C
Parameter
Symbol
MIN
MAX Unit
Positive power supply voltage
VSH -0.3 +9.0 V
Negative power supply voltage
VSL -6.0 +0.3 V
Analog input signals (1)
VI - 2.0 Vp-p
Digital input/output signals (2)
VI -0.3 +5.4 V
DC bias voltage of common electrode driving signal
VCDC VSL VSH V
Brightness adjusting terminal
VBRT 0 +5.1 V
Storage temperature (3)
tSTG -30 85 °C
Operating temperature (3, 4)
surface of panel
Top1
-30
85 °C
environment
Top2 -30
60 °C
Notes:
1. VBS, VR1, VG2, VB1, VR2, VG2, VB2 terminals (Video signal)
2. NTP, HRV, VRV, SAM, VSW, HSY, VSY, CKC, CK terminals
3. The temperature of all parts in module should not exceed this rating. Maximum wet-bulb temperature should be less than 58°C. No dew condensation.
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
Original specifications created by Sharp.
August 2003
Rev. 0
3 Display Systems Division • Hillsboro, OR • (503) 690-2460 • www.wedc.com










Скачать PDF:

[ ENH050Q1-600.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
ENH050Q1-600(ENH050Q1-xxx) Color TFT-LCD Module Features GENERAL DESCRIPTIONWEDC
WEDC

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск