|
|
PDF AZ695 Data sheet ( Hoja de datos )
| Número de pieza | AZ695 | |
| Descripción | SENSITIVE SUBMINIATURE RELAY | |
| Fabricantes | ZETTLER Electronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AZ695 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
AZ695
SENSITIVE
SUBMINIATURE RELAY
FEATURES
• Extremely small footprint utilizing only 0.18 square
inch of PCB area
• Thin vertical profile only 0.256" wide
• 1 Form A contact with up to 5 Amp switching
capability
• High sensitivity, 100 mW pickup
• Dielectric strength 3000 Vrms contact to coil
• Coils to 24 VDC
• Epoxy sealed for automatic wave soldering
and cleaning
• Sockets are also available
• UL file E44211; CSA file 74461
CONTACTS
GENERAL DATA
Arrangement
Ratings
Material
Resistance
SPST (1 Form A)
Life Expectancy
Minimum operations
Resistive load:
Mechanical
Electrical
20 million operations
1 X 105 at 5 A, 30 VDC or 250 VAC
Max. switched power: 150 W or 1250 VA
Max. switched current: 5 A
Operate Time (typical) 6 ms at nominal coil voltage
Max. switched voltage: 150* VDC or 250 VAC
Inductive load (p.f. = 0.40, L/R = 7 ms)
2 A at 250 VAC, 30 VDC
Release Time (typical) 3 ms at nominal coil voltage
(with no coil suppression)
UL Rating: 5 A at 30 VDC or 250 VAC
www.DataSheet4U.com
Dielectric Strength
750 Vrms between open contacts
1/10 HP 120 VAC
(at sea level for 1 min.) 3000 Vrms contact to coil
Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Insulation
Resistance
100 megohms min. at 20°C, 500 VDC,
50% RH
Options:
Silver cadmium oxide
Dropout
Greater than 10% of nominal coil voltage
Silver cadmium oxide with gold plating
Ambient Temperature At nominal coil voltage
< 30 milliohms initially
(at rated current, voltage drop method)
Operating
Storage
-40°C (-40°F) to 70°C (158°F)
-40°C (-40°F) to 105°C (221°F)
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
100 mW
550 mW at 20°C (68°F) ambient
420 mW at 40°C (104°F) ambient
Vibration
Shock
Enclosure
Terminals
Max. Solder Temp.
0.062" DA at 10–55 Hz
10 g
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
Temperature Rise 25°C (45°F) at nominal coil voltage
Max. Solder Time
5 seconds
Temperature
Max. 105°C (221°F)
Max. Solvent Temp. 80°C (176°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Minimum permissible contact load:
SCO contact: 100 mA at 5 VDC
SCO contact with gold plating: 10 mA at 5 VDC
4. Specifications subject to change without notice.
Max. Immersion Time 30 seconds
Weight
3 grams
ZETTLER electronics
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com [email protected]
Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
2000-08-31
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet AZ695.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AZ692 | (AZ692 / AZ693) MINIATURE POWER RELAY | ZETTLER Electronics |
| AZ693 | (AZ692 / AZ693) MINIATURE POWER RELAY | ZETTLER Electronics |
| AZ695 | SENSITIVE SUBMINIATURE RELAY | ZETTLER Electronics |
| AZ6951 | SENSITIVE SUBMINIATURE RELAY |  Zettler |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |