PDF SIL40C-12SADJ-VY Data sheet ( Hoja de datos )

Número de pieza	SIL40C-12SADJ-VY
Descripción	DC-DC / Non-Isolated
Fabricantes	Emerson
Logotipo
Hay una vista previa y un enlace de descarga de SIL40C-12SADJ-VY (archivo pdf) en la parte inferior de esta página. Total 3 Páginas
No Preview Available ! SIL40C Series 12 Vin single output DC-DC CONVERTERS C Class Non-isolated • 40 A current rating • Input voltage range: 10.2 Vdc to 13.8 Vdc • Output voltage range: 0.9 Vdc to 5.0 Vdc • Industry leading value • Cost optimized design • Excellent transient response • Output Voltage adjustability • Pathway for future upgrades • Supports silicon voltage migration • Resulting in reduced design-in and qualification time • Designed in reliability: MTBF of >4 million hours per Telcordia SR-332 • Current share • Available RoHS compliant The SIL40C Series is a new high density open frame non-isolated converter for space-sensitive applications. Each model has a wide input range (10.2 Vdc to 13.8 Vdc) and offer a wide 0.9 Vdc to 5.0 Vdc output voltage range with a 40 A load. An external resistor adjusts the output voltage from its pre-set value of 0.9 V to any value up to 5 V. Typical efficiencies are 92% at full load conditions. The SIL40C series offers remote ON/OFF and overcurrent protection as standard. With full international safety approval including EN60950 and UL/cUL60950, the SIL40C reduces compliance costs and time to market. All specifications are typical at nominal input, full load at 25 °C unless otherwise stated 1 NEW Product 2 YEAR WARRANTY SPECIFICATIONS OUTPUT SPECIFICATIONS Voltage adjustability (See Note 5) 0.9-5.0 Vdc Output setpoint accuracy 1.0% trim resistors ±3.0% Line regulation Low line to high line ±0.2% max. Load regulation Full load to min. load ±1.5% max. Min/max load 0 A/40 A Overshoot At turn-on 1.0% max. Undershoot At turn-off 100 mV max. Ripple and noise 5 Hz to 20 MHz (See Note 1) 50 mV pk-pk 15 mV rms Transient response (See Note 2) Deviation 75 mV 50 µs recovery to within regulation band INPUT SPECIFICATIONS Input voltage range Input current Minimum load Remote OFF Input current (max.) Input reflected ripple Remote ON/OFF Logic compatibility ON OFF Start-up time (See Note 9) Turn ON threshold Turn OFF threshold (See Note 4) Power up Remote ON/OFF 10.2-13.8 Vdc 290 mA 30 mA 22 A max @ lo max and Vin = 10.2 V 150 mA pk-pk Active high >2.4 Vdc <0.8 Vdc <30 ms <30 ms 9.0 Vdc 7.6 Vdc GENERAL SPECIFICATIONS Efficiency See table Switching frequency Fixed 300 kHz typ. Approvals and standards (See Note 7) TÜV Product Services IEC60950, UL/cUL60950 Material flammability UL94V-0 Weight 28.3 g (1.0 oz) MTBF Telcordia SR-332, method II @ 40 ºC 4,585,991 hours ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Note 10) Operating ambient, temperature 0 ºC to +80 ºC Non-operating -40 ºC to +125 ºC PROTECTION Short-circuit Overtemperature Foldback, non-latching Hiccup, non-latching RECOMMENDED SYSTEM CAPACITANCE Input capacitance Output capacitance (See Note 11) 2 x 270 µF/20 mΩ esr max. (See Note 11) 3 x 680 µF/10 mΩ esr max. International Safety Standard Approvals UL/cUL CAN/CSA 22.2 No. E139421 UL60950 file No. E139421 TÜV Product Service (EN60950) Certificate No. B 03 08 19870 219 CB report and certificate to IEC60950 File Name: sil40c.pdf Rev (04): 16 Dec 2005 1 page

Páginas	Total 3 Páginas
PDF Descargar	[ Datasheet SIL40C-12SADJ-VY.PDF ]

Hoja de datos destacado

Número de pieza	Descripción	Fabricantes
SIL40C-12SADJ-VJ	DC-DC / Non-Isolated	Emerson
SIL40C-12SADJ-VP4J	DC-DC / Non-Isolated	Emerson
SIL40C-12SADJ-VY	DC-DC / Non-Isolated	Emerson

Número de pieza	Descripción	Fabricantes
SLA6805M	High Voltage 3 phase Motor Driver IC.	Sanken
SDC1742	12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.	Analog Devices

DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.

DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar