|
|
Datasheet KK74HC4094A Equivalent ( PDF ) |
| N.º | Número de pieza | Descripción | Fabricantes | Category |
| 1 | KK74HC4094A | 8-Bit Serial-Input Shift Register TECHNICAL DATA
KK74HC4094A
8-Bit Serial-Input Shift Register With Latched 3-State Outputs
High-Performance Silicon-Gate CMOS
The KK74HC4094A is identical in pinout to the LS/ALS4094. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALS |  KODENSHI KOREA | register |
KK7 Datasheet ( Hoja de datos ) - resultados coincidentes |
| N.º | Número de pieza | Descripción | Fabricantes | Catagory |
| 1 | KK7100 | AUTOMOTIVE DIGITAL CLOCK IC TECHNICAL DATA
AUTOMOTIVE DIGITAL CLOCK IC
DESCRIPTION
KK7100 is a automotive digital clock, CMOS LSI. It drives fluorescent indicator panel directly. It can be driven by a 4.194304 MHz crystal oscillator or an external clock signal (1024 Hz). It has 4-ways display brightness control function and i KODENSHI KOREA data | | |
| 2 | KK7101 | GROUND FAULT INTERRUPTER EARTH LEAKAGE CURRENT DETECTOR KK7101
GROUND FAULT INTERRUPTER EARTH LEAKAGE CURRENT DETECTOR
Description
The KK7101N/D is designed for use in earth leakage circuit interrupters for operation directly off the AC Line in breakers. It contains pre regulator, main regulator, after regulator, differential amplifier, level comparator KODENSHI KOREA detector | | |
| 3 | KK7406 | Hex Inverter Buffers/Drivers TECHNICAL DATA
KK7406 Hex Inverter Buffers/Drivers with Open-Collector High-Voltage Outputs
The KK7406 monolithic TTL hex inverter buffers/drivers feature high-voltage open collector outputs for interfacing with high-level circuits (such as MOS) or for driving high-current load KODENSHI KOREA driver | | |
| 4 | KK7407 | Hex Buffers/Drivers TECHNICAL DATA
KK7407
Hex Buffers/Drivers with OpenCollector High-Voltage Outputs
LOGIC DIAGRAM
ORDERING INFORMATION KK7407N Plastic KK7407D SOIC TA = -10° to 70° C for all packages
PIN ASSIGNMENT
FUNCTION TABLE
Inputs PIN 14 =VCC PIN 7 = GND A H L Z = High Impedance Out KODENSHI KOREA driver | | |
| 5 | KK74123 | Dual Monostable Multivibrator TECHNICAL DATA
KK74123
Dual Monostable Multivibrator with Clear
The KK74123 multivibrator feature d-c triggering from gated lowlevel-active (A) and high-level-active (B) inputs, and also provide overriding direct clear inputs. Complementary outputs are provided. The retrigger KODENSHI KOREA data | | |
| 6 | KK74128 | QUAD 2-INPUT NOR LINE DRIVER TECHNICAL DATA
QUAD 2-INPUT NOR LINE DRIVER
This device contains four independent 2-input-NOR line drivers. It performs the Boolean function Y = A+B or Y = A*B. The KK74128 is designed to drive 50 ohm lines. The KK74128 is characterized for operation from 0 Co to 70 oC.
KK7412 KODENSHI KOREA driver | | |
| 7 | KK74180 | 9-Bit ODD/EVEN Parity Generators/Checkers TECHNICAL DATA
KK74180
9-Bit ODD/EVEN Parity Generators/Checkers
LOGIC DIAGRAM
ORDERING INFORMATION KK74180N Plastic KK74180D SOIC TA = -10° to 70° C for all packages
PIN ASSIGNMENT
PIN 14 =VCC PIN 7 = GND
FUNCTION TABLE
Inputs Σ of H’s at EVEN A Thru H EVEN ODD EVEN KODENSHI KOREA data | | |
| 8 | KK7440 | Dual 4-Input Positive-NAND Buffers TECHNICAL DATA
KK7440
Dual 4-Input Positive-NAND Buffers
LOGIC DIAGRAM
ORDERING INFORMATION KK7440N Plastic KK7440D SOIC TA = -10° to 70° C for all packages
PIN ASSIGNMENT
PIN 14 =VCC PIN 7 = GND
NC - No internal connection
FUNCTION TABLE
Inputs A L X X X H B X L X X H KODENSHI KOREA buffer | | |
| 9 | KK7472 | AND-Gated J-K Master-Slave Flip- Flops TECHNICAL DATA
KK7472
AND-Gated J-K Master-Slave FlipFlops with Reset and Clear
LOGIC DIAGRAM
ORDERING INFORMATION KK7472N Plastic KK7472D SOIC TA = -10° to 70° C for all packages
PIN ASSIGNMENT
PIN 14 =VCC PIN 7 = GND NC - No internal connection
FUNCTION TABLE
Inputs Re KODENSHI KOREA gate | |
| Esta página es del resultado de búsqueda del KK74HC4094A. Si pulsa el resultado de búsqueda de KK74HC4094A se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
nuevas actualizaciones
| Número de pieza | Descripción | Fabricantes | |
| SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
 Sanken |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |