|
|
PDF APL3225 Data sheet ( Hoja de datos )
| Número de pieza | APL3225 | |
| Descripción | Li+ Charger Protection IC | |
| Fabricantes | ANPEC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de APL3225 (archivo pdf) en la parte inferior de esta página. Total 15 Páginas | ||
|
No Preview Available !
APL3225
Li+ Charger Protection IC
Features
General Description
• Provide OUT Pin 5V Voltage Clamping Protection
• Thermal Charging Regulation Protection
• Provide Input Over-voltage Protection
• Provide Input Over-current Protection
• Provide Over Temperature Protection
• Provide Reverse Current Blocking
• High Immunity of False Triggering
• High Accuracy Protection Threshold
• Low On Resistance 0.3Ω Typ.
• Compact TDFN2x2-8 and DFN3x3-8 Packages
• Lead Free and Green Devices Available
(RoHS Compliant)
Applications
• Cell Phones
Pin Configuration
The APL3225 provides complete Li+ charger protection
against input over-voltage, input over-current and over-
temperature. When any of the monitored parameters is
over the threshold, the IC turns off the charging current.
All protections also have deglitch time against false trig-
gering due to voltage spikes or current transients.
The APL3225 integrates a 5.5V LDO to prevent ACIN over-
shoot reaching CHR_LDO and OUT. When any transient
peak voltage above 5.5V presenting in ACIN pin, but be-
low OVP threshold, the internal LDO will clamp its output
at 5.5V. When ACIN voltage exceeds OVP threshold, the
device will turn off charging current. The charging current
is controlled by the GATDRV pin. When sourcing a cur-
rent from the GATDRV pin, the OUT pin delivers the charg-
ing current which is 200-fold magnified in amplitude
based on GATDRV’s current.
Other features include accurate VVCDT/VACIN voltage divider,
reverse current blocking from OUT to ACIN and OTP
protection. The APL3225 provides complete Li+ charger
protections, and saves the external MOSFET and Schottky
diode for the charger of cell phone’s PMIC. The above
features and small package make the APL3225 an ideal
part for cell phones applications.
ACIN 1
ACIN 2
GND 3
VCDT 4
8 OUT
7 OUT
6 CHR_LDO
5 GATDRV
DFN3x3-8
(Top View)
ACIN 1
ACIN 2
GND 3
VCDT 4
8 OUT
7 OUT
6 CHR_LDO
5 GATDRV
TDFN2x2-8
(Top View)
= Exposed Pad (connected to ground
plane for better heat dissipation)
Simplified Application Circuit
5V
Adapter
ACIN CHR_LDO
APL3225
GATDRV
VCDT
OUT
GND
Li+
Battery
CHR_LDO
PMIC
GATDRV
VCDT
ISENS
VBAT
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and
advise customers to obtain the latest version of relevant information to verify before placing orders.
Copyright © ANPEC Electronics Corp.
Rev. A.1 - Nov., 2012
1
www.anpec.com.tw
Free Datasheet http://www.datasheet4u.com/
1 page  
APL3225
Pin Description
PIN
NO NAME
1
ACIN
2
3 GND
4 VCDT
5 GATDRV
6
7
8
Exposed Pad
CHR_LDO
OUT
-
FUNCTION
Power Supply Input. Connect this pin to external DC supply. Bypass to GND with a 1µF
(minimum) ceramic capacitor.
Ground terminal.
Provide an interval voltage divider. This pin divides ACIN voltage into 39/369 ratio.
Charging current control pin. When sourcing a current from this pin, the OUT pin will source
out a current whose magnitude is 200xIGATDRV .
Output Pin. The pin provides supply voltage to the PMIC input. Bypass to GND with a 1µF
(minimum) ceramic capacitor.
Output Pins. The pin provides supply source current in series with a resistor to battery.
This pin possesses the overshoot clamp function to limit peak voltage.
Exposed Thermal Pad. Must be electrically connected to the GND pin.
Copyright © ANPEC Electronics Corp.
Rev. A.1 - Nov., 2012
5
www.anpec.com.tw
Free Datasheet http://www.datasheet4u.com/
5 Page 
APL3225
Carrier Tape & Reel Dimensions
OD0
P0 P2
P1
A
K0
SECTION A-A
A0
B
OD1 B
SECTION B-B
A
d
Application
A
T1
H
T1
C
178.0 2.00 50 MIN.
8.4+2.00 13.0+0.50
-0.00
-0.20
TDFN2x2-8
P0
P1
P2
D0
4.0 0.10
4.0 0.10
2.0 0.05
1.5+0.10
-0.00
Application
A
H
T1
C
178.0 2.00 50 MIN.
12.4+2.00 13.0+0.50
-0.00
-0.20
DFN3x3-8
P0
P1
P2
D0
d
1.5 MIN.
D1
1.5 MIN.
d
1.5 MIN.
D1
D W E1
20.2 MIN. 8.0 0.20 1.75 0.10
T
0.6+0.00
-0.4
D
A0
2.35 MIN
W
B0
2.35 MIN
E1
20.2 MIN. 12.0 0.30 1.75 0.10
T A0 B0
F
3.50 0.05
K0
1.00 0.20
F
5.5 0.05
K0
4.0 0.10
8.0 0.10
2.0 0.05
1.5+0.10
-0.00
1.5 MIN.
0.6+0.00
-0.40
3.30 0.20
3.30 0.20
1.30 0.20
Devices Per Unit
Package Type
TDFN2x2-8
DFN3x3-8
Unit
Tape & Reel
Tape & Reel
Quantity
3000
3000
(mm)
Copyright © ANPEC Electronics Corp.
Rev. A.1 - Nov., 2012
11
www.anpec.com.tw
Free Datasheet http://www.datasheet4u.com/
11 Page | ||
| Páginas | Total 15 Páginas | |
| PDF Descargar | [ Datasheet APL3225.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| APL3222 | Slew-Rate-Controlled Load Switch | ANPEC |
| APL3225 | Li+ Charger Protection IC | ANPEC |
| APL3227 | High-Current Overvoltage Protectors | ANPEC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |