|
|
Número de pieza | MM3199 | |
Descripción | Protection for Lithium-Ion/Lithium Polymer Batteries | |
Fabricantes | Mitsumi Electronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MM3199 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
No Preview Available ! MITSUMI
Protection for Lithium-Ion/Lithium Polymer Batteries (1 cell) MM3099/MM3199 Series
Protection for Lithium-Ion/Lithium Polymer Batteries (1 cell)
Monolithic IC MM3099/MM3199 Series April 26, 2004
Outline
This is a protection IC developed for use with 1-serial cell lithium-ion/lithium polymer rechargeable batteries. It
provides a function to protect the batteries by detecting overcharge, overdischarge, discharge overcurrent,
and other abnormalities and turning off the external Nch MOS FET. The outputs of COUT pin (charge FET
control pin) and DOUT pin (discharge FET control pin) are CMOS outputs, so that the external Nch MOS FET
can be driven directly. A charge overcurrent detection function is provided for abnormal charge detection. In
addition, the IC has a built-in timer circuit(for each detection delay time), so that the protection circuitry can
be comprised with fewer external components. Furthermore, by setting the DS pin at VDD level, overcharge,
overdischarge, discharge overcurrent can be detected, and the delay time during release can be shortened.
Features
1. Uses high voltage CMOS process
Absolute maximum rating for charger connection 32V
2. Detection voltage precision
Overcharge detection voltage ±20mV (Ta=25°C),
±25mV (Ta=-5~60°C)
Overdischarge detection voltage ±35mV (Ta=25°C),
±58mV (Ta=-5~60°C)
Discharge overcurrent detection voltage ±10mV (Ta=25°C),
±15mV (Ta=-5~60°C)
3. Built-in detection delay time (timer circuit) Overcharge detection delay time 0.25 ~ 7.0s (mask option)
Overdischarge detection delay time 0.25 ~ 7.0s (mask option)
Discharge overcurrent detection delay time 0.25 ~ 7.0s (mask
option)
Short detection delay time 400µs
4. Includes a charge overcurrent detection function
5. Overcharge, overdischarge, and discharge overcurrent can be detected, and the delay time during release
can be shortened with the DS pin.
6. 0V charging disable function (mask option)
Packages
SOT-26A
SON-6A
1 page MITSUMI
Protection for Lithium-Ion/Lithium Polymer Batteries (1 cell) MM3099/MM3199 Series
*TOPR=-5~60°C 2
Item
Symbol
Measurement conditions
Overcharge detection voltage VDET1
R1=330Ω
Overdischarge detection voltage VDET2
V-=0V, R1=330Ω
Discharging overcurrent
detection voltage
VDET3
VDD=3V, R2=2.2kΩ
Charging overcurrent
detection voltage
VDET4
VDD=3V, R2=2.2kΩ
Short detection voltage
VSHORT
VDD=3V
Overcharge detection delay time tVDET1
VDD=3.6V 4.4V
Recharge release delay time tVREL1
VDD=4.4V 3.6V
Overdischarge detection delay time tVDET2
VDD=3.6V 2.2V
Overdischarge release delay time tVREL2
VDD=3V, V-=3V 0V
Discharging overcurrent
detection delay time
tVDET3
VDD=3V, V-=0V 1V
Discharging overcurrent
release delay time
tVREL3
VDD=3V, V-=3V 0V
Charging overcurrent
detection delay time
tVDET4
VDD=3V, V-=0V -1V
Charging overcurrent
release delay time
tVREL3
VDD=3V, V-=-1V 0V
Short detection delay time tSHORT
VDD=3V, V-=0V 3V
Note: 1 The test circuit symbols.
**2 The all parameters on this page is guaranteed by design.
Min. Typ. Max. Units
4.250 4.275 4.300 V
2.242 2.300 2.358 V
*1
B
D
0.085 0.100 0.115 V F
-0.130 -0.100 -0.070 V G
VDD-1.2 VDD-0.9 VDD-0.6
0.70 1.00 1.30
11.2 16.0 20.8
14.0 20.0 26.0
0.7 1.0 1.3
V
s
ms
ms
ms
F
B
B
D
E
4.2 6.0 7.8 ms F
0.7 1.0 1.3 ms F
5.6 8.0 10.4 ms G
0.7 1.0 1.3 ms G
250 400 600 µs F
5 Page MITSUMI
Protection for Lithium-Ion/Lithium Polymer Batteries (1 cell) MM3099/MM3199 Series
Timing chart
Overcharge, charging, overcurrent operation
Connect charger
Connect
load
Connect charger
Connect load
Overcurrent Open charger,
charger connect load
VDD
VDET1
V-
VDD
VDET3
VSS
VDET4
COUT
VDD
V-
ICHARGE
0
IDISCHARGE
tVDET1
tVDET1
tVREL1
tVDET4
tVREL1
t
t
tVREL4
t
t
11 Page |
Páginas | Total 12 Páginas | |
PDF Descargar | [ Datasheet MM3199.PDF ] |
Número de pieza | Descripción | Fabricantes |
MM3199 | Protection for Lithium-Ion/Lithium Polymer Batteries | Mitsumi Electronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |